PartsTable
Technical Data Sheet
Download PDF

2-010-123 — DISK DRIVE UNIT

✓ Government record, cited
— · STORAGE_HDD · 3.5_SATA_HDD
PRODUCT OVERVIEW

2-010-123: DISK DRIVE UNIT.

The DISK DRIVE UNIT is a the manufacturer hard disk drive designed for enterprise environments demanding consistent performance and data integrity. Key specifications include height: 0.813 INCHES NOMINAL IN, material: COPPER ALLOY, outside_diameter: 2.750 INCHES NOMINAL IN, special_features: ALSO USED ON WITH CP-2504/URC, COMPUTER,CONTROL-MONITOR, end_item_identification: CP-2504A/URC,COMPUTER,CONTROL-MONITOR A, part_name_assigned_by_controlling_agency: HARD DISK DRIVE,SCS. This part is cataloged in the U.S.

Government catalog under NSN 4820-01-104-6251, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
STORAGE_HDD→ 3.5_SATA_HDD→ 2-010-123
NSN: 4820-01-104-6251
NIINs: 011046251, 014977516
FSC: 4820 — Valves, Nonpowered
CAGE: 28193 — HENRY TECHNOLOGIES, INC. (USA)
SPECIFICATIONS
height0.813 INCHES NOMINAL IN
materialCOPPER ALLOY
outside_diameter2.750 INCHES NOMINAL IN
special_featuresALSO USED ON WITH CP-2504/URC, COMPUTER,CONTROL-MONITOR
end_item_identificationCP-2504A/URC,COMPUTER,CONTROL-MONITOR A
part_name_assigned_by_controlling_agencyHARD DISK DRIVE,SCS
NSN4820-01-104-6251
COMPONENT DIAGRAM
RELEASE LATCH — NL-SAS 7.2K 2-010-123 OEM NL-SAS INTERFACE INTERPOSER SAS drive in SATA tray? Check board compatibility 3.5" (101.6 x 146mm) LFF 3.5" DRIVE | — | NL-SAS 7.2K NL-SAS uses SAS protocol at 7.2K RPM | SAS backplane supports SATA, not reverse Tray generation matters | Gen8 LFF tray differs from Gen10 TITLE LFF 3.5" DRIVE PN 2-010-123 MFR OEM
KEY FEATURES
•
OUTSIDE DIAMETER: 2.750 INCHES NOMINAL IN
•
HEIGHT: 0.813 INCHES NOMINAL IN
•
MATERIAL: COPPER ALLOY
TYPICAL APPLICATIONS
  • Enterprise storage arrays and SANs
  • Direct-attached storage (DAS) expansion
  • Database tier storage (OLTP, OLAP)
  • Virtual machine datastore expansion
  • Backup-to-disk and disaster recovery targets
  • Content delivery and media streaming storage
TECHNICAL CHARACTERISTICS
OUTSIDE DIAMETER2.750 INCHES NOMINAL IN
HEIGHT0.813 INCHES NOMINAL IN
SPECIAL FEATURESINTEGRAL SCREEN
MATERIALCOPPER ALLOY
SUBSTITUTES & CROSS-REFERENCES 2
4820PL1397443Reference document
Same NSN cross-reference
Reference document — Informative reference only
V73-17Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 2-010-123?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2-010-123?
2-010-123 is a DISK DRIVE UNIT. It is classified as a STORAGE_HDD (3.5_SATA_HDD).
What parts can replace 2-010-123?
There are 2 known substitutes for 2-010-123: 4820PL1397443, V73-17. Substitute compatibility should be verified for your specific system.
What is the NSN for 2-010-123?
2-010-123 is cataloged in the U.S. Government catalog under NSN 4820-01-104-6251. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2-010-123