PartsTable
Technical Data Sheet
Download PDF

2-00EA — CAP,PROTECTIVE,DUST AND MOISTURE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

2-00EA: CAP,PROTECTIVE,DUST AND MOISTURE.

CAP,PROTECTIVE,DUST AND MOISTURE. Key specifications include material: PLASTIC POLYVINYL CHLORIDE (PVC), design_type: FRICTION, overall_diameter: 1.750 INCHES MAXIMUM IN, inside_diameter_length: 0.340 INCHES NOMINAL IN, round_cap_outside_surface_condition: SMOOTH, material_document_and_classification: CAGE 99193, EMS53109 MFR REF SINGLE MATERIAL RESPONSE. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-514-6567, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2-00EA
NSN: 5340-00-514-6567
FSC: 5340 — Hardware, Commercial
CAGE: 25205 — MOLDED DEVICES, INC. DBA MDI DIV MOLDED DEVICES (USA)
SPECIFICATIONS
materialPLASTIC POLYVINYL CHLORIDE (PVC)
design_typeFRICTION
overall_diameter1.750 INCHES MAXIMUM IN
inside_diameter_length0.340 INCHES NOMINAL IN
round_cap_outside_surface_conditionSMOOTH
material_document_and_classificationCAGE 99193, EMS53109 MFR REF SINGLE MATERIAL RESPONSE
tube_outside_diameter_for_which_designed1.630 INCHES NOMINAL IN
NSN5340-00-514-6567
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2-00EA MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DESIGN TYPE: FRICTION
•
OVERALL DIAMETER: 1.750 INCHES MAXIMUM IN
•
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED: 1.630 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: CAGE 99193, EMS53109 MFR REF SINGLE MATERIAL RESPONSE
•
MATERIAL: PLASTIC POLYVINYL CHLORIDE (PVC)
•
INSIDE DIAMETER LENGTH: 0.340 INCHES NOMINAL IN
•
ROUND CAP OUTSIDE SURFACE CONDITION: SMOOTH
TECHNICAL CHARACTERISTICS
DESIGN TYPEFRICTION
OVERALL DIAMETER1.750 INCHES MAXIMUM IN
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED1.630 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONCAGE 99193, EMS53109 MFR REF SINGLE MATERIAL RESPONSE
MATERIALPLASTIC POLYVINYL CHLORIDE (PVC)
INSIDE DIAMETER LENGTH0.340 INCHES NOMINAL IN
ROUND CAP OUTSIDE SURFACE CONDITIONSMOOTH
SUBSTITUTES & CROSS-REFERENCES 3
2-00Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
194-505-9019Reference document
Same NSN cross-reference
Reference document — Secondary reference
10117385Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 2-00EA?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2-00EA?
2-00EA is a CAP,PROTECTIVE,DUST AND MOISTURE.
What parts can replace 2-00EA?
There are 3 known substitutes for 2-00EA: 2-00, 194-505-9019, 10117385. Substitute compatibility should be verified for your specific system.
What is the NSN for 2-00EA?
2-00EA is cataloged in the U.S. Government catalog under NSN 5340-00-514-6567. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2-00EA

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.