PartsTable
Technical Data Sheet
PartsTable / O-RING / 2-008V747-75
2-008V747-75 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, hardness_rating: 70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM, special_features: USED ON FOLLOWING: FUEL CONTROL,MAIN 2915-01-023-4300; FUEL CONTROL,MAIN 2915-01-021-8113, center_hole_diameter: 0.171 INCHES MINIMUM AND 0.181 INCHES MAXIMUM IN, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN, end_item_identification: TF34-GE-100 ENGINE. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-166-0967, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2-008V747-75
NSN: 5331-00-166-0967
FSC: 5331 — O-RING
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM
hardness_rating70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM
special_featuresUSED ON FOLLOWING: FUEL CONTROL,MAIN 2915-01-023-4300; FUEL CONTROL,MAIN 2915-01-021-8113
center_hole_diameter0.171 INCHES MINIMUM AND 0.181 INCHES MAXIMUM IN
cross-sectional_height0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
end_item_identificationTF34-GE-100 ENGINE
material_document_and_classification(02697)V0747 MFR REF SINGLE MATERIAL RESPONSE
part_name_assigned_by_controlling_agencyPACKING,PREFORMED
NSN5331-00-166-0967
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2-008V747-75 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
002017Interchangeable
interchangeable cross-reference
interchangeable
66C64058Interchangeable
interchangeable cross-reference
interchangeable
22046-14Interchangeable
interchangeable cross-reference
interchangeable
MILR25897Interchangeable
interchangeable cross-reference
interchangeable
4400173-0140Interchangeable
interchangeable cross-reference
interchangeable
826281Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2-008V747-75?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2-008V747-75?
2-008V747-75 is a O-RING.
What parts can replace 2-008V747-75?
There are 25 known substitutes for 2-008V747-75: 002017, 66C64058, 22046-14 and 22 more. Substitute compatibility should be verified for your specific system.
Is 2-008V747-75 still available?
2-008V747-75 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2-008V747-75

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026