PartsTable
Technical Data Sheet
Download PDF

2-008 — RESISTOR,FIXED,WIRE WOUND

✓ Government record, cited
PanzerGlass · MRO · MRO_GENERAL
PRODUCT OVERVIEW

2-008: RESISTOR,FIXED,WIRE WOUND.

The RESISTOR,FIXED,WIRE WOUND is a PanzerGlass industrial component. Key specifications include material: STEEL COMP 1010 OVERALL, nut_length: 0.625 INCHES NOMINAL IN, nut_thickness: 0.344 INCHES NOMINAL IN, thread_direction: RIGHT-HAND, width_across_corners: 0.715 INCHES NOMINAL IN, end_item_identification: 611501678118. This part is cataloged in the U.S.

Government catalog under NSN 4730-00-013-7409, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 2-008
NSN: 4730-00-013-7409
NIINs: 000137409, 000202786, 000283858, 000655301, 001052097, 001661078, 002922671, 003563378, 003651229, 004137836, 005034305, 005186596, 005494915, 005533703, 007178895, 007777650, 007993590, 008721482, 010234732, 011601218, 011714825, 012724630, 013120201, 013151411, 013308848, 013771572, 014258873, 015052949, 015338160, 015706662, 016629348, 017069841
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 25567 — THE GORMAN-RUPP COMPANY DIV GORMAN-RUPP (USA)
SPECIFICATIONS
materialSTEEL COMP 1010 OVERALL
nut_length0.625 INCHES NOMINAL IN
nut_thickness0.344 INCHES NOMINAL IN
thread_directionRIGHT-HAND
width_across_corners0.715 INCHES NOMINAL IN
end_item_identification611501678118
hole_configuration_styleCONFIGURATION A
part_name_assigned_by_controlling_agencyNUT, PLAIN, WELDING
NSN4730-00-013-7409
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: 2-008 · PanzerGlass ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CONNECTION STYLE: INVERTED FLARE (TUBE) FIRST END
•
NOMINAL OVERALL LENGTH: 1.070 INCHES IN
•
NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED: 0.500 INCHES FIRST END IN
•
OPERATING PRESSURE: 3500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
•
NOMINAL THREAD SIZE: 0.375 INCHES SECOND END IN
•
SEAT ANGLE: 42.0 DEGREES FIRST END
TECHNICAL CHARACTERISTICS
CONNECTION STYLEINVERTED FLARE (TUBE) FIRST END
CONNECTION STYLEPLAIN (PIPE) SECOND END
NOMINAL OVERALL LENGTH1.070 INCHES IN
NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED0.500 INCHES FIRST END IN
OPERATING PRESSURE3500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
NOMINAL THREAD SIZE0.375 INCHES SECOND END IN
NOMINAL THREAD SIZE0.750 INCHES FIRST END IN
SEAT ANGLE42.0 DEGREES FIRST END
MAXIMUM OPERATING TEMP250.0 FAHRENHEIT SINGLE RESPONSE DEGF
SPECIAL FEATURESGRUMMAN A10 AIRCRAFT
SUBSTITUTES & CROSS-REFERENCES 9
SAE-J512Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
730172Reference document
Same NSN cross-reference
Reference document — Secondary reference
48-W-08X06Reference document
Same NSN cross-reference
Reference document — Secondary reference
X1506IC8Reference document
Same NSN cross-reference
Reference document — Secondary reference
231010Reference document
Same NSN cross-reference
Reference document — Secondary reference
70908HReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 2-008?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2-008?
2-008 is a RESISTOR,FIXED,WIRE WOUND manufactured by PanzerGlass. It is classified as a MRO (MRO_GENERAL).
What parts can replace 2-008?
There are 9 known substitutes for 2-008: SAE-J512, 730172, 48-W-08X06 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2-008?
2-008 is cataloged in the U.S. Government catalog under NSN 4730-00-013-7409. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2-008

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.