PartsTable / O-RING / 2-007C873-70
2-007C873-70
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER CHLOROPRENE CLASS CR, temp_rating: -60.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, outside_diameter: 0.274 INCHES MINIMUM AND 0.296 INCHES MAXIMUM IN, center_hole_diameter: 0.140 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-159-3472, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
2-007C873-70
NSN: 5331-00-159-3472 FSC: 5331 — O-RINGCAGE: 02697 — PARKER-HANNIFIN CORP DIV O-RING DIVISION (USA)
SPECIFICATIONS
material RUBBER CHLOROPRENE CLASS CR temp_rating -60.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF hardness_rating 70.0 SHORE DUROMETER A NOMINAL outside_diameter 0.274 INCHES MINIMUM AND 0.296 INCHES MAXIMUM IN center_hole_diameter 0.140 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN cross-sectional_height 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN NSN 5331-00-159-3472
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 2-007C873-70
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
• TEMP RATING: -60.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
• OUTSIDE DIAMETER: 0.274 INCHES MINIMUM AND 0.296 INCHES MAXIMUM IN
• HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL
• MATERIAL: RUBBER CHLOROPRENE CLASS CR
• CENTER HOLE DIAMETER: 0.140 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN TEMP RATING -60.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF OUTSIDE DIAMETER 0.274 INCHES MINIMUM AND 0.296 INCHES MAXIMUM IN HARDNESS RATING 70.0 SHORE DUROMETER A NOMINAL MATERIAL RUBBER CHLOROPRENE CLASS CR CENTER HOLE DIAMETER 0.140 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
53-522 Interchangeable interchangeable cross-reference
interchangeable
69207 Interchangeable interchangeable cross-reference
interchangeable
01459 Interchangeable interchangeable cross-reference
interchangeable
1014 Interchangeable interchangeable cross-reference
interchangeable
485-9001-19 Interchangeable Same NIIN cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 2-007C873-70?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2-007C873-70?
2-007C873-70 is a O-RING.
What parts can replace 2-007C873-70?
There are 8 known substitutes for 2-007C873-70: 53-522, 69207, 01459 and 5 more. Substitute compatibility should be verified for your specific system.
Is 2-007C873-70 still available?
2-007C873-70 is currently cancelled.
Request a Quote — 2-007C873-70