PartsTable
Technical Data Sheet
PartsTable / O-RING / 2-003L1120-70
2-003L1120-70 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROSILICONE CLASS FQ, center_hole_diameter: 0.052 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN, cross-sectional_height: 0.057 INCHES MINIMUM AND 0.063 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-344-8264, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2-003L1120-70
NSN: 5331-01-344-8264
FSC: 5331 — O-RING
CAGE: 02697 — PARKER-HANNIFIN CORP DIV O-RING DIVISION (USA)
SPECIFICATIONS
materialRUBBER FLUOROSILICONE CLASS FQ
center_hole_diameter0.052 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
cross-sectional_height0.057 INCHES MINIMUM AND 0.063 INCHES MAXIMUM IN
NSN5331-01-344-8264
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2-003L1120-70 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.057 INCHES MINIMUM AND 0.063 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.052 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
•
MATERIAL: RUBBER FLUOROSILICONE CLASS FQ
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.057 INCHES MINIMUM AND 0.063 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.052 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
MATERIALRUBBER FLUOROSILICONE CLASS FQ
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
378019Interchangeable
interchangeable cross-reference
interchangeable
10163440Interchangeable
interchangeable cross-reference
interchangeable
M25988/1-003Interchangeable
Same NIIN cross-reference
interchangeable
MIL-DTL-25988/1Interchangeable
Same NIIN cross-reference
interchangeable
MIL-R-25988/1Interchangeable
Same NIIN cross-reference
interchangeable
L1120 2-003Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2-003L1120-70?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2-003L1120-70?
2-003L1120-70 is a O-RING.
What parts can replace 2-003L1120-70?
There are 6 known substitutes for 2-003L1120-70: 378019, 10163440, M25988/1-003 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2-003L1120-70?
2-003L1120-70 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-344-8264. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2-003L1120-70

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026