PartsTable
Technical Data Sheet
Download PDF

2 1-16X3-4CV — PIN,GROOVED,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

2 1-16X3-4CV: PIN,GROOVED,HEADLESS.

The PIN,GROOVED,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL COMP 6150 OVERALL, overall_length: 0.750 INCHES NOMINAL IN, style_designator: FULL LENGTH GROOVE, surface_treatment: ZINC OVERALL, pin_large_end_diameter: 0.067 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN, pin_small_end_diameter: 0.0615 INCHES MINIMUM AND 0.0625 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-271-6916, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2 1-16X3-4CV
NSN: 5315-00-271-6916
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 73957 — GROOV-PIN CORP (USA)
SPECIFICATIONS
materialSTEEL COMP 6150 OVERALL
overall_length0.750 INCHES NOMINAL IN
style_designatorFULL LENGTH GROOVE
surface_treatmentZINC OVERALL
pin_large_end_diameter0.067 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
pin_small_end_diameter0.0615 INCHES MINIMUM AND 0.0625 INCHES MAXIMUM IN
material_document_and_classificationSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5315-00-271-6916
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 2 1-16X3-4CV · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: FULL LENGTH GROOVE
•
PIN LARGE END DIAMETER: 0.067 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
PIN SMALL END DIAMETER: 0.0615 INCHES MINIMUM AND 0.0625 INCHES MAXIMUM IN
•
SURFACE TREATMENT: ZINC OVERALL
•
MATERIAL: STEEL COMP 6150 OVERALL
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORFULL LENGTH GROOVE
PIN LARGE END DIAMETER0.067 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH0.750 INCHES NOMINAL IN
PIN SMALL END DIAMETER0.0615 INCHES MINIMUM AND 0.0625 INCHES MAXIMUM IN
SURFACE TREATMENTZINC OVERALL
MATERIALSTEEL COMP 6150 OVERALL
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES 1
2Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy 2 1-16X3-4CV?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2 1-16X3-4CV?
2 1-16X3-4CV is a PIN,GROOVED,HEADLESS.
What parts can replace 2 1-16X3-4CV?
There is 1 known substitute for 2 1-16X3-4CV: 2. Substitute compatibility should be verified for your specific system.
What is the NSN for 2 1-16X3-4CV?
2 1-16X3-4CV is cataloged in the U.S. Government catalog under NSN 5315-00-271-6916. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2 1-16X3-4CV

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.