PartsTable
Technical Data Sheet
Download PDF

2 0191-010 — SEAL,STRAPPING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

2 0191-010: SEAL,STRAPPING.

The SEAL,STRAPPING is a the manufacturer industrial component. Key specifications include length: 35.80 MILLIMETERS NOMINAL MM, material: ZINC ALLOY, special_features: ZINC PLATED STEEL, COVER ID 16.50 MM, VALVE HEX SIZE 19.10 MM MM, part_name_assigned_by_controlling_agency: TAMPER RESISTANT COVER, CONTROL KIT. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-725-8284, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2 0191-010
NSN: 5340-01-725-8284
FSC: 5340 — Hardware, Commercial
CAGE: AC90N — BAE SYSTEMS HAGGLUNDS AKTIEBOLAG (SWE)
SPECIFICATIONS
length35.80 MILLIMETERS NOMINAL MM
materialZINC ALLOY
special_featuresZINC PLATED STEEL, COVER ID 16.50 MM, VALVE HEX SIZE 19.10 MM MM
part_name_assigned_by_controlling_agencyTAMPER RESISTANT COVER, CONTROL KIT
NSN5340-01-725-8284
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2 0191-010 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 35.80 MILLIMETERS NOMINAL MM
•
SUPPLEMENTARY FEATURES: COVER IS DESIGNED TO BE A NON-REMOVABLE ITEM, ONCE REMOVED IT CAN NOT BE RE-ASSEMBLED TO THE CARTRIDGE
•
MATERIAL: ZINC ALLOY
TECHNICAL CHARACTERISTICS
LENGTH35.80 MILLIMETERS NOMINAL MM
SUPPLEMENTARY FEATURESCOVER IS DESIGNED TO BE A NON-REMOVABLE ITEM, ONCE REMOVED IT CAN NOT BE RE-ASSEMBLED TO THE CARTRIDGE
SPECIAL FEATURESZINC PLATED STEEL, COVER ID 16.50 MM, VALVE HEX SIZE 19.10 MM MM
PART NAME ASSIGNED BY CONTROLLING AGENCYTAMPER RESISTANT COVER, CONTROL KIT
MATERIALZINC ALLOY
SUBSTITUTES & CROSS-REFERENCES 1
F2167-000087Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 2 0191-010?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2 0191-010?
2 0191-010 is a SEAL,STRAPPING.
What parts can replace 2 0191-010?
There is 1 known substitute for 2 0191-010: F2167-000087. Substitute compatibility should be verified for your specific system.
What is the NSN for 2 0191-010?
2 0191-010 is cataloged in the U.S. Government catalog under NSN 5340-01-725-8284. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2 0191-010

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.