1TD716: SCREW,MACHINE.
The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.359 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN, thread_length: 0.530 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN, fastener_length: 0.720 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN, hardness_rating: 23.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM. This part is cataloged in the U.S.
Government catalog under NSN 5305-01-117-4181, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| head_style | FLAT COUNTERSUNK |
| thread_class | 2A A |
| head_diameter | 0.359 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN |
| thread_length | 0.530 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN |
| fastener_length | 0.720 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN |
| hardness_rating | 23.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM |
| thread_direction | RIGHT-HAND |
| countersink_angle | 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM |
| internal_drive_style | CROSS RECESS TYPE 1 |
| nominal_thread_diameter | 0.190 INCHES IN |
| minimum_tensile_strength | 120000 POUNDS PER SQUARE INCH LBS |
| thread_quantity_per_inch | 24 |
| NSN | 5305-01-117-4181 |
| FASTENER LENGTH | 0.720 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN |
| SCREW MATERIAL DOCUMENT AND CLASSIFICATION | SAE J429 GR 5 ASSN STD ALL MATERIAL RESPONSES |
| THREAD LENGTH | 0.530 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN |
| HARDNESS RATING | 23.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM |
| NOMINAL THREAD DIAMETER | 0.190 INCHES IN |
| HEAD STYLE | FLAT COUNTERSUNK |
| THREAD DIRECTION | RIGHT-HAND |
| SCREW MATERIAL | STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1021 OR STEEL COMP 1022 OR STEEL COMP 1023 OR STEEL COMP 1025 OR STEEL COMP 1026 OR STEEL COMP 1029 OR STEEL COMP 1030 OR STEEL COMP 1033 OR STEEL COMP 1034 OR STEEL COMP 1035 OR STEEL COMP 1037 OR STEEL COMP 1038 OR STEEL COMP 1039 OR STEEL COMP 1040 |
| MINIMUM TENSILE STRENGTH | 120000 POUNDS PER SQUARE INCH LBS |
| INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 |
No substitute or cross-reference records for this part.