PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1P973842
1P973842 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1022 OVERALL, head_style: FILLISTER COUNTERSUNK, head_height: 0.105 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.303 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN, thread_length: 0.593 INCHES MINIMUM AND 0.623 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-157-8284, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1P973842
NSN: 5305-00-157-8284
FSC: 5305
CAGE: 03038 — LONG-LOK, LLC (USA)
SPECIFICATIONS
materialSTEEL COMP 1022 OVERALL
head_styleFILLISTER COUNTERSUNK
head_height0.105 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.303 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
thread_length0.593 INCHES MINIMUM AND 0.623 INCHES MAXIMUM IN
fastener_length0.720 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
locking_featureSTRIP THREADS
special_featuresW/HEADER POINT
thread_directionRIGHT-HAND
countersink_angle81.0 DEGREES NOMINAL
surface_treatmentCADMIUM OVERALL
NSN5305-00-157-8284
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 1P973842 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.105 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN
•
HEAD DIAMETER: 0.303 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
INTERNAL DRIVE STYLE: HEXAGON
•
THREAD QUANTITY PER INCH: 24
•
COUNTERSINK ANGLE: 81.0 DEGREES NOMINAL
•
WIDTH ACROSS FLATS: 0.156 INCHES MINIMUM AND 0.159 INCHES MAXIMUM IN
•
MATERIAL: STEEL COMP 1022 OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
HEAD HEIGHT0.105 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN
HEAD DIAMETER0.303 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.190 INCHES IN
INTERNAL DRIVE STYLEHEXAGON
THREAD QUANTITY PER INCH24
COUNTERSINK ANGLE81.0 DEGREES NOMINAL
WIDTH ACROSS FLATS0.156 INCHES MINIMUM AND 0.159 INCHES MAXIMUM IN
MATERIALSTEEL COMP 1022 OVERALL
SURFACE TREATMENTCADMIUM OVERALL
LOCKING FEATURESTRIP THREADS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
804147-821Interchangeable
interchangeable cross-reference
interchangeable
441-1272-018Interchangeable
interchangeable cross-reference
interchangeable
CKR05BX821KInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1P973842?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1P973842?
1P973842 is a SCREW,CAP,SOCKET HEAD.
What parts can replace 1P973842?
There are 3 known substitutes for 1P973842: 804147-821, 441-1272-018, CKR05BX821K. Substitute compatibility should be verified for your specific system.
What is the NSN for 1P973842?
1P973842 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-157-8284. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1P973842

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026