PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1P4693
1P4693 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The CUP,TAPERED ROLLER BEARING is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: STEEL OVERALL, overall_width: 27.0 MILLIMETERS NOMINAL MM, outside_diameter: 150.0 MILLIMETERS NOMINAL MM, special_features: DUTY CLASS JM SERIES, style_designator: NORMAL ANGLE, backface_corner_radius: 2.5 MILLIMETERS NOMINAL MM. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-351-3927, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1P4693
NSN: 3110-00-351-3927
FSC: 3110
CAGE: 11083 — CATERPILLAR INC DIV CATERPILLAR DEFENSE (USA)
SPECIFICATIONS
materialSTEEL OVERALL
overall_width27.0 MILLIMETERS NOMINAL MM
outside_diameter150.0 MILLIMETERS NOMINAL MM
special_featuresDUTY CLASS JM SERIES
style_designatorNORMAL ANGLE
backface_corner_radius2.5 MILLIMETERS NOMINAL MM
standard_tolerance_designationAFBMA CLASS 2
NSN3110-00-351-3927
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 1P4693 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BACKFACE CORNER RADIUS: 2.5 MILLIMETERS NOMINAL MM
•
OUTSIDE DIAMETER: 150.0 MILLIMETERS NOMINAL MM
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
STYLE DESIGNATOR: NORMAL ANGLE
•
MATERIAL: STEEL OVERALL
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
BACKFACE CORNER RADIUS2.5 MILLIMETERS NOMINAL MM
OUTSIDE DIAMETER150.0 MILLIMETERS NOMINAL MM
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
SPECIAL FEATURESDUTY CLASS JM SERIES
STYLE DESIGNATORNORMAL ANGLE
MATERIALSTEEL OVERALL
OVERALL WIDTH27.0 MILLIMETERS NOMINAL MM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
C1172-10Interchangeable
interchangeable cross-reference
interchangeable
GEZ010 ESInterchangeable
interchangeable cross-reference
interchangeable
6SBB10Interchangeable
interchangeable cross-reference
interchangeable
90972Interchangeable
interchangeable cross-reference
interchangeable
619697C1Interchangeable
Same NIIN cross-reference
interchangeable
JM719113CLASSKInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1P4693?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1P4693?
1P4693 is a CUP,TAPERED ROLLER BEARING.
What parts can replace 1P4693?
There are 9 known substitutes for 1P4693: C1172-10, GEZ010 ES, 6SBB10 and 6 more. Substitute compatibility should be verified for your specific system.
Is 1P4693 still available?
1P4693 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1P4693

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026