PartsTable
Technical Data Sheet
1N82AG ✓ Verified by PartsTable
· SFP TRANSCEIVER
WHAT YOU NEED TO KNOW
SR = Short Range (multimode, 300m) | LR = Long Range (single-mode, 10km) DOM = Digital Optical Monitoring — most enterprise SFPs support it
MATCH ALL THREE: Speed + Wavelength + Brand compatibility
PRODUCT OVERVIEW

The SEMICONDUCTOR DEVICE,DIODE is a the manufacturer industrial component. Key specifications include material: SILICON SEMICONDUCTOR, overall_length: 0.230 INCHES MINIMUM AND 0.300 INCHES MAXIMUM IN, mounting_method: TERMINAL, terminal_length: 1.000 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN, overall_diameter: 0.085 INCHES MINIMUM AND 0.107 INCHES MAXIMUM IN, features_provided: HERMETICALLY SEALED CASE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5961-00-647-1081, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1N82AG
NSN: 5961-00-647-1081
FSC: 5961
CAGE: 70998 — BIRD ELECTRONIC CORPORATION DIV BIRD ELECTRONIC CORP (USA)
SPECIFICATIONS
materialSILICON SEMICONDUCTOR
overall_length0.230 INCHES MINIMUM AND 0.300 INCHES MAXIMUM IN
mounting_methodTERMINAL
terminal_length1.000 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
overall_diameter0.085 INCHES MINIMUM AND 0.107 INCHES MAXIMUM IN
features_providedHERMETICALLY SEALED CASE
terminal_type_and_quantity2 UNINSULATED WIRE LEAD
specification/standard_data81349-MIL-S-19500/250 GOVERNMENT SPECIFICATION
power_rating_per_characteristic100.0 MILLIWATTS MAXIMUM POWER OUTPUT
current_rating_per_characteristic25.00 MILLIAMPERES MAXIMUM AVERAGE ON-STATE CURRENT, 180 DEGREES CONDUCTION ANGLE, AVERAGE OVER A FULL 60-HZ CYCLE
voltage_rating_in_volts_per_characteristic3.0 MAXIMUM REVERSE VOLTAGE, INSTANTANEOUS
maximum_operating_temp_per_measurement_point100.0 CELSIUS AMBIENT AIR DEGC
NSN5961-00-647-1081
COMPONENT DIAGRAM
BAIL LATCH 10G SFP+ 850nm · SR (MMF, 300m) DOM: Digital Optical Monitoring TX RX LC DUPLEX 20-PIN EDGE CONNECTOR ~56.5 mm ~13.4mm SFP+ TRANSCEIVER | 10G | 850nm | SR (MMF, 300m) Hot-swappable | LC duplex fiber | DDM/DOM supported TITLE SFP+ XCVR PN 1N82AG MFR OEM SEMICONDUCTOR DEVICE,DIODE
KEY FEATURES
TERMINAL TYPE AND QUANTITY: 2 UNINSULATED WIRE LEAD
TERMINAL LENGTH: 1.000 INCHES MINIMUM IN
OVERALL DIAMETER: 0.250 INCHES MAXIMUM IN
FEATURES PROVIDED: HERMETICALLY SEALED CASE
VOLTAGE RATING IN VOLTS PER CHARACTERISTIC: 5.0 MAXIMUM REVERSE VOLTAGE, PEAK
CURRENT RATING PER CHARACTERISTIC: 15.00 MILLIAMPERES MAXIMUM FORWARD CURRENT, DC
MATERIAL: SILICON SEMICONDUCTOR
TECHNICAL CHARACTERISTICS (FLIS)
TERMINAL TYPE AND QUANTITY2 UNINSULATED WIRE LEAD
TERMINAL LENGTH1.000 INCHES MINIMUM IN
OVERALL DIAMETER0.250 INCHES MAXIMUM IN
FEATURES PROVIDEDHERMETICALLY SEALED CASE
VOLTAGE RATING IN VOLTS PER CHARACTERISTIC5.0 MAXIMUM REVERSE VOLTAGE, PEAK
CURRENT RATING PER CHARACTERISTIC15.00 MILLIAMPERES MAXIMUM FORWARD CURRENT, DC
OVERALL LENGTH0.500 INCHES MAXIMUM IN
MATERIALSILICON SEMICONDUCTOR
MATERIALGLASS ENCLOSURE
POWER RATING PER CHARACTERISTIC100.0 MILLIWATTS MAXIMUM TOTAL POWER DISSIPATION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
1N82AGInterchangeable
interchangeable cross-reference
interchangeable
20063Interchangeable
interchangeable cross-reference
interchangeable
4807-03-0003Interchangeable
interchangeable cross-reference
interchangeable
5961PL0189933Interchangeable
interchangeable cross-reference
interchangeable
6357-91Interchangeable
interchangeable cross-reference
interchangeable
45-00092Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99ESD SensitiveNot HAZMAT
Ready to buy 1N82AG?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1N82AG?
1N82AG is a SEMICONDUCTOR DEVICE,DIODE.
What parts can replace 1N82AG?
There are 9 known substitutes for 1N82AG: 1N82AG, 20063, 4807-03-0003 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1N82AG?
1N82AG is cataloged in the Federal Logistics Information System (FLIS) under NSN 5961-00-647-1081. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1N82AG