PartsTable
Technical Data Sheet
1N626 ✓ Verified by PartsTable
· SFP TRANSCEIVER
WHAT YOU NEED TO KNOW
SR = Short Range (multimode, 300m) | LR = Long Range (single-mode, 10km) DOM = Digital Optical Monitoring — most enterprise SFPs support it
MATCH ALL THREE: Speed + Wavelength + Brand compatibility
PRODUCT OVERVIEW

The SEMICONDUCTOR DEVICE,DIODE is a the manufacturer industrial component. Key specifications include material: GLASS ENCLOSURE, overall_length: 0.230 INCHES MINIMUM AND 0.300 INCHES MAXIMUM IN, mounting_method: TERMINAL, terminal_length: 1.000 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN, overall_diameter: 0.092 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN, features_provided: HERMETICALLY SEALED CASE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5961-00-660-4802, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1N626
NSN: 5961-00-660-4802
FSC: 5961
CAGE: 80131 — ELECTRONIC INDUSTRIES ASSOCIATION
SPECIFICATIONS
materialGLASS ENCLOSURE
overall_length0.230 INCHES MINIMUM AND 0.300 INCHES MAXIMUM IN
mounting_methodTERMINAL
terminal_length1.000 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
overall_diameter0.092 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
features_providedHERMETICALLY SEALED CASE
terminal_type_and_quantity2 UNINSULATED WIRE LEAD
specification/standard_data81349-MIL-S-19500/132 GOVERNMENT SPECIFICATION
power_rating_per_characteristic400.0 MILLIWATTS MAXIMUM TOTAL POWER DISSIPATION
current_rating_per_characteristic1.00 AMPERES MAXIMUM FORWARD CURRENT, DC AND 250.00 MILLIAMPERES MAXIMUM AVERAGE ON-STATE CURRENT, 180 DEGREES CONDUCTION ANGLE, AVERAGE OVER A FULL 60-HZ CYCLE
voltage_rating_in_volts_per_characteristic80.0 MAXIMUM REVERSE VOLTAGE, INSTANTANEOUS AND 60.0 MAXIMUM REVERSE VOLTAGE, PEAK
maximum_operating_temp_per_measurement_point175.0 CELSIUS AMBIENT AIR DEGC
NSN5961-00-660-4802
COMPONENT DIAGRAM
BAIL LATCH 10G SFP+ 850nm · SR (MMF, 300m) DOM: Digital Optical Monitoring TX RX LC DUPLEX 20-PIN EDGE CONNECTOR ~56.5 mm ~13.4mm SFP+ TRANSCEIVER | 10G | 850nm | SR (MMF, 300m) Hot-swappable | LC duplex fiber | DDM/DOM supported TITLE SFP+ XCVR PN 1N626 MFR OEM SEMICONDUCTOR DEVICE,DIODE
KEY FEATURES
MATERIAL: SILICON SEMICONDUCTOR
CURRENT RATING PER CHARACTERISTIC: 30.00 MILLIAMPERES MAXIMUM FORWARD CURRENT, DC
MAXIMUM OPERATING TEMP PER MEASUREMENT POINT: 150.0 CELSIUS AMBIENT AIR DEGC
OVERALL DIAMETER: 0.105 INCHES NOMINAL IN
FEATURES PROVIDED: HERMETICALLY SEALED CASE
TERMINAL LENGTH: 1.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSILICON SEMICONDUCTOR
MATERIALGLASS ENCLOSURE
CURRENT RATING PER CHARACTERISTIC30.00 MILLIAMPERES MAXIMUM FORWARD CURRENT, DC
MAXIMUM OPERATING TEMP PER MEASUREMENT POINT150.0 CELSIUS AMBIENT AIR DEGC
OVERALL DIAMETER0.105 INCHES NOMINAL IN
FEATURES PROVIDEDHERMETICALLY SEALED CASE
TERMINAL LENGTH1.000 INCHES NOMINAL IN
OVERALL LENGTH0.265 INCHES MAXIMUM IN
VOLTAGE RATING IN VOLTS PER CHARACTERISTIC50.0 MAXIMUM REVERSE VOLTAGE, PEAK
MOUNTING METHODTERMINAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
FD841Interchangeable
interchangeable cross-reference
interchangeable
26006910Interchangeable
interchangeable cross-reference
interchangeable
1N695Interchangeable
interchangeable cross-reference
interchangeable
4270134001Interchangeable
interchangeable cross-reference
interchangeable
12485401Interchangeable
interchangeable cross-reference
interchangeable
23-0017Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99ESD SensitiveNot HAZMAT
Ready to buy 1N626?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1N626?
1N626 is a SEMICONDUCTOR DEVICE,DIODE.
What parts can replace 1N626?
There are 7 known substitutes for 1N626: FD841, 26006910, 1N695 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1N626?
1N626 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5961-00-660-4802. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1N626