PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1MS95
1MS95 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, thickness: 0.022 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN, hole_diameter: 0.255 INCHES MINIMUM AND 0.275 INCHES MAXIMUM IN, overall_diameter: 0.495 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN, surface_treatment: CADMIUM AND CHROMATE OVERALL, peripheral_shape_style: ROUND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-167-0835, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1MS95
NSN: 5310-00-167-0835
FSC: 5310
CAGE: 45152 — OSHKOSH CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
thickness0.022 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN
hole_diameter0.255 INCHES MINIMUM AND 0.275 INCHES MAXIMUM IN
overall_diameter0.495 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN
surface_treatmentCADMIUM AND CHROMATE OVERALL
peripheral_shape_styleROUND
center_hole_shape_styleROUND
end_item_identificationA4 BRADLEY FIGHTING VEHICLE; A3 BRADLEY FIGHTING VEHICLE
cross-sectional_shape_styleRECTANGULAR
nondefinitive_spec/std_dataA TYPE AND 1 GRADE AND A CLASS
material_document_and_classificationMIL-S-7952 MIL SPEC SINGLE MATERIAL RESPONSE OR QQ-S-698 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5310-00-167-0835
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 1MS95 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NONDEFINITIVE SPEC/STD DATA: A TYPE AND 1 GRADE AND A CLASS
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-7952 MIL SPEC SINGLE MATERIAL RESPONSE OR QQ-S-698 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MATERIAL: STEEL OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
THICKNESS: 0.022 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
NONDEFINITIVE SPEC/STD DATAA TYPE AND 1 GRADE AND A CLASS
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-7952 MIL SPEC SINGLE MATERIAL RESPONSE OR QQ-S-698 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
END ITEM IDENTIFICATIONA4 BRADLEY FIGHTING VEHICLE; A3 BRADLEY FIGHTING VEHICLE
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIALSTEEL OVERALL
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
THICKNESS0.022 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN
OVERALL DIAMETER0.495 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN
PERIPHERAL SHAPE STYLEROUND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 35
00241-0142Interchangeable
interchangeable cross-reference
interchangeable
TC3-4-1IWSTR0KEInterchangeable
interchangeable cross-reference
interchangeable
241-0142Interchangeable
interchangeable cross-reference
interchangeable
124A9372AA003Interchangeable
interchangeable cross-reference
interchangeable
120391Interchangeable
interchangeable cross-reference
interchangeable
126177Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1MS95?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1MS95?
1MS95 is a WASHER,FLAT.
What parts can replace 1MS95?
There are 35 known substitutes for 1MS95: 00241-0142, TC3-4-1IWSTR0KE, 241-0142 and 32 more. Substitute compatibility should be verified for your specific system.
Is 1MS95 still available?
1MS95 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1MS95

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026