1MA100D05-10388 — SUPPORT,STRUCTURAL COMPONENT,AIR

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

1MA100D05-10388: SUPPORT,STRUCTURAL COMPONENT,AIR.

SUPPORT,STRUCTURAL COMPONENT,AIR. Key specifications include length: 10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT, material: ALUMINUM ALLOY 7075, overall_width: 1.375 INCHES NOMINAL IN, heat_treatment: T-73511 SOLUTION HEAT TREATED, overall_height: 0.425 INCHES NOMINAL IN, first_tip_style: SQUARE END. This part is cataloged in the U.S.

Government catalog under NSN 9540-01-330-6403, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

1MA100D05-10388

NSN: 9540-01-330-6403
FSC: 9540 — Structural Shapes, Nonferrous Base Metal
CAGE: 76301 — THE BOEING COMPANY DIV DEFENSE (USA)

SPECIFICATIONS

length	10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT
material	ALUMINUM ALLOY 7075
overall_width	1.375 INCHES NOMINAL IN
heat_treatment	T-73511 SOLUTION HEAT TREATED
overall_height	0.425 INCHES NOMINAL IN
first_tip_style	SQUARE END
basic_shape_style	ANGLE
left_inside_angle	90.0 DEGREES NOMINAL
fabrication_method	EXTRUDED
base_flange_thickness	0.094 INCHES NOMINAL IN
weight_per_unit_measure	0.187 POUNDS PER LINEAR FOOT LBS
left_side_flange_thickness	0.050 INCHES NOMINAL IN
NSN	9540-01-330-6403

COMPONENT DIAGRAM

KEY FEATURES

•

LENGTH: 10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT

•

BASE FLANGE THICKNESS: 0.094 INCHES NOMINAL IN

•

HEAT TREATMENT: T-73511 SOLUTION HEAT TREATED

•

MATERIAL DOCUMENT AND CLASSIFICATION: AMS-Q-A-200/11 FED SPEC SINGLE MATERIAL RESPONSE

•

LEFT SIDE FLANGE THICKNESS: 0.050 INCHES NOMINAL IN

•

BASIC SHAPE STYLE: ANGLE

TECHNICAL CHARACTERISTICS

OVERALL HEIGHT	0.425 INCHES NOMINAL IN
LENGTH	10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT
BASE FLANGE THICKNESS	0.094 INCHES NOMINAL IN
HEAT TREATMENT	T-73511 SOLUTION HEAT TREATED
MATERIAL DOCUMENT AND CLASSIFICATION	AMS-Q-A-200/11 FED SPEC SINGLE MATERIAL RESPONSE
OVERALL WIDTH	1.375 INCHES NOMINAL IN
LEFT SIDE FLANGE THICKNESS	0.050 INCHES NOMINAL IN
BASIC SHAPE STYLE	ANGLE
WEIGHT PER UNIT MEASURE	0.187 POUNDS PER LINEAR FOOT LBS
FILLET RADIUS WHERE LEFT FLANGE JOINS BASE FLANGE	0.100 INCHES NOMINAL IN

SUBSTITUTES & CROSS-REFERENCES 3

AMS-QQ-A-200/11Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

ASTM B221Reference document

Same NSN cross-reference

Reference document — Secondary reference

QQ-A-200/11Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 1MA100D05-10388?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 1MA100D05-10388?

1MA100D05-10388 is a SUPPORT,STRUCTURAL COMPONENT,AIR.

What parts can replace 1MA100D05-10388?

There are 3 known substitutes for 1MA100D05-10388: AMS-QQ-A-200/11, ASTM B221, QQ-A-200/11. Substitute compatibility should be verified for your specific system.

What is the NSN for 1MA100D05-10388?

1MA100D05-10388 is cataloged in the U.S. Government catalog under NSN 9540-01-330-6403. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

1MA100D05-10388 — SUPPORT,STRUCTURAL COMPONENT,AIR

Request a Quote — 1MA100D05-10388