1M7360 — CLAMP,SYNCHRO

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

1M7360: CLAMP,SYNCHRO.

The CLAMP,SYNCHRO is a the manufacturer industrial component. Key specifications include width: 1.000 INCHES NOMINAL IN, height: 0.120 INCHES NOMINAL IN, length: 10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT, material: ALUMINUM ALLOY 7178, hole_diameter: 0.406 INCHES NOMINAL IN, leg_thickness: 0.062 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 9540-00-905-3686, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

1M7360

NSN: 9540-00-905-3686
NIINs: 009053686, 009442552
FSC: 9540 — Structural Shapes, Nonferrous Base Metal
CAGE: 76301 — THE BOEING COMPANY DIV DEFENSE (USA)

SPECIFICATIONS

width	1.000 INCHES NOMINAL IN
height	0.120 INCHES NOMINAL IN
length	10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT
material	ALUMINUM ALLOY 7178
hole_diameter	0.406 INCHES NOMINAL IN
leg_thickness	0.062 INCHES NOMINAL IN
heat_treatment	T-6 SOLUTION HEAT TREATED
overall_height	3.630 INCHES NOMINAL IN
first_tip_style	SQUARE END
furnished_items	LOCKNUT
top_flange_width	2.100 INCHES NOMINAL IN
basic_shape_style	T SHAPE
NSN	9540-00-905-3686

COMPONENT DIAGRAM

KEY FEATURES

•

RIGHT SIDE TOP FLANGE THICKNESS: 0.062 INCHES NOMINAL IN

•

LENGTH: 10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT

•

LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES: 1.034 INCHES NOMINAL IN

•

RIGHT TOP INSIDE ANGLE: 98.0 DEGREES NOMINAL

•

LEFT TOP INSIDE ANGLE: 82.0 DEGREES NOMINAL

•

HEAT TREATMENT: T-6 SOLUTION HEAT TREATED

•

FILLET RADIUS WHERE TOP RIGHT FLANGE JOINS WEB FLANGE/LEG: 0.125 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

OVERALL HEIGHT	3.630 INCHES NOMINAL IN
RIGHT SIDE TOP FLANGE THICKNESS	0.062 INCHES NOMINAL IN
LENGTH	10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT
LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES	1.034 INCHES NOMINAL IN
RIGHT TOP INSIDE ANGLE	98.0 DEGREES NOMINAL
LEFT TOP INSIDE ANGLE	82.0 DEGREES NOMINAL
HEAT TREATMENT	T-6 SOLUTION HEAT TREATED
FILLET RADIUS WHERE TOP RIGHT FLANGE JOINS WEB FLANGE/LEG	0.125 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATION	AMS-Q-A-200/13 FED SPEC SINGLE MATERIAL RESPONSE
FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG	0.125 INCHES NOMINAL IN

SUBSTITUTES & CROSS-REFERENCES 7

PA20572Reference document

Same NSN cross-reference

Reference document — Secondary reference

AMS-QQ-A-200/13Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

52599Reference document

Same NSN cross-reference

Reference document — Secondary reference

QQ-A-250/11Reference document

Same NSN cross-reference

Reference document — Secondary reference

81786Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

60-1568Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 1M7360?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 1M7360?

1M7360 is a CLAMP,SYNCHRO.

What parts can replace 1M7360?

There are 7 known substitutes for 1M7360: PA20572, AMS-QQ-A-200/13, 52599 and 4 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 1M7360?

1M7360 is cataloged in the U.S. Government catalog under NSN 9540-00-905-3686. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

1M7360 — CLAMP,SYNCHRO

Request a Quote — 1M7360