PartsTable
Technical Data Sheet
Download PDF

1KP155 — PLATE,MOUNTING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

1KP155: PLATE,MOUNTING.

The PLATE,MOUNTING is a the manufacturer industrial component. Key specifications include length: 160.000 INCHES NOMINAL IN, end_item_identification: 2320-01-465-2174 MK23 AND 2320-01-465-2176 MK25, PART OF ARMOR KIT, part_name_assigned_by_controlling_agency: PLATE,THREADED; THREADED RULER 3. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-534-1419, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1KP155
NSN: 5340-01-534-1419
FSC: 5340 — Hardware, Commercial
CAGE: 75Q65 — OSHKOSH DEFENSE LLC (USA)
SPECIFICATIONS
length160.000 INCHES NOMINAL IN
end_item_identification2320-01-465-2174 MK23 AND 2320-01-465-2176 MK25, PART OF ARMOR KIT
part_name_assigned_by_controlling_agencyPLATE,THREADED; THREADED RULER 3
NSN5340-01-534-1419
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1KP155 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 160.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
LENGTH160.000 INCHES NOMINAL IN
SPECIAL FEATURESNOTES: 1.REMOVE SHARP EDGES; 2. PAINT CARS PER PLASAN SPC 05-03-08 OR APPROVAL BY PLASAN TOP COAT-CARC-GREEN 383; 3. MATERIAL: STANDARD PROFILE SAE 1010-1020 30X10; 4. QTY FOR VEHICLE-1 PCS; 5. WEIGHT: 0.4 KG; CORNER RADIUS: 5.0 MM NOMINAL; MOUNTING HOLE QTY: 2; MOUNTING HOLE DIAMETER: 7.9 MM NOMINAL ALL HOLES; MOUNTING HOLE TYPE: THREADED; THREAD SIZE: 18; SCREW THREAD SERIES DESIGNATOR: UNC. KG
PART NAME ASSIGNED BY CONTROLLING AGENCYPLATE,THREADED; THREADED RULER 3
END ITEM IDENTIFICATION2320-01-465-2174 MK23 AND 2320-01-465-2176 MK25, PART OF ARMOR KIT
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
0259020971-00Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 1KP155?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1KP155?
1KP155 is a PLATE,MOUNTING.
What parts can replace 1KP155?
There is 1 known substitute for 1KP155: 0259020971-00. Substitute compatibility should be verified for your specific system.
What is the NSN for 1KP155?
1KP155 is cataloged in the U.S. Government catalog under NSN 5340-01-534-1419. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1KP155