PartsTable
Technical Data Sheet
Download PDF

1JH1773PC18 — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

1JH1773PC18: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL COMP E52100 OUTER RING, bore_shape: STRAIGHT, bore_diameter: 35.0 MILLIMETERS NOMINAL MM, overall_width: 1.3750 INCHES NOMINAL IN, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-227-2840, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1JH1773PC18
NSN: 3110-00-227-2840
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 11660 — WESTINGHOUSE ELECTRIC CORP CONTROL BUSINESS UNIT
SPECIFICATIONS
materialSTEEL COMP E52100 OUTER RING
bore_shapeSTRAIGHT
bore_diameter35.0 MILLIMETERS NOMINAL MM
overall_width1.3750 INCHES NOMINAL IN
seal_quantity2
load_directionRADIAL
surface_finishGROUND
special_featuresW/O GREASE PLUG
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
bearing_seal_typeCONTACT
internal_clearance0.0040 INCHES MINIMUM RADIAL AND 0.0060 INCHES MAXIMUM RADIAL IN
lubrication_materialGREASE
NSN3110-00-227-2840
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 1JH1773PC18 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
BEARING SEAL TYPE: CONTACT
•
LUBRICATION MATERIAL: GREASE
•
INTERNAL CLEARANCE: 0.0040 INCHES MINIMUM RADIAL AND 0.0060 INCHES MAXIMUM RADIAL IN
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD SINGLE MATERIAL RESPONSE OUTER RING
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
BEARING SEAL TYPECONTACT
LUBRICATION MATERIALGREASE
INTERNAL CLEARANCE0.0040 INCHES MINIMUM RADIAL AND 0.0060 INCHES MAXIMUM RADIAL IN
SURFACE FINISHGROUND
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD SINGLE MATERIAL RESPONSE OUTER RING
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD SINGLE MATERIAL RESPONSE BALL
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD SINGLE MATERIAL RESPONSE INNER RING
OVERALL WIDTH1.3750 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 7
AA59596Reference document
Same NSN cross-reference
Reference document — Identification reference
1JH2957-16Reference document
Same NSN cross-reference
Reference document — Secondary reference
1JH686-21Reference document
Same NSN cross-reference
Reference document — Secondary reference
1JH686PC21Reference document
Same NSN cross-reference
Reference document — Secondary reference
S1297131Reference document
Same NSN cross-reference
Reference document — Secondary reference
AA 59596-907JACESame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 1JH1773PC18?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1JH1773PC18?
1JH1773PC18 is a BEARING,BALL,ANNULAR.
What parts can replace 1JH1773PC18?
There are 7 known substitutes for 1JH1773PC18: AA59596, 1JH2957-16, 1JH686-21 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1JH1773PC18?
1JH1773PC18 is cataloged in the U.S. Government catalog under NSN 3110-00-227-2840. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1JH1773PC18