PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1JA8690H05
1JA8690H05 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING WITH RETAINER is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC PACKING, construction: ONE-PIECE, outside_diameter: 0.687 INCHES NOMINAL IN, surface_treatment: CADMIUM RETAINER, retainer_thickness: 0.051 INCHES MINIMUM AND 0.057 INCHES MAXIMUM IN, packing_inside_diameter: 0.401 INCHES MINIMUM AND 0.409 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-814-6675, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1JA8690H05
NSN: 5330-00-814-6675
FSC: 5330
CAGE: 97942 — NORTHROP GRUMMAN SYSTEMS CORPORATION DBA NORTHROP GRUMMAN SYSTEMS CORP (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC PACKING
constructionONE-PIECE
outside_diameter0.687 INCHES NOMINAL IN
surface_treatmentCADMIUM RETAINER
retainer_thickness0.051 INCHES MINIMUM AND 0.057 INCHES MAXIMUM IN
packing_inside_diameter0.401 INCHES MINIMUM AND 0.409 INCHES MAXIMUM IN
packing_ring_cross-sectional_diameter0.072 INCHES NOMINAL IN
NSN5330-00-814-6675
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1JA8690H05 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER SYNTHETIC PACKING
•
OUTSIDE DIAMETER: 0.687 INCHES NOMINAL IN
•
PACKING INSIDE DIAMETER: 0.401 INCHES MINIMUM AND 0.409 INCHES MAXIMUM IN
•
CONSTRUCTION: ONE-PIECE
•
PACKING RING CROSS-SECTIONAL DIAMETER: 0.072 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM RETAINER
•
RETAINER THICKNESS: 0.051 INCHES MINIMUM AND 0.057 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER SYNTHETIC PACKING
OUTSIDE DIAMETER0.687 INCHES NOMINAL IN
PACKING INSIDE DIAMETER0.401 INCHES MINIMUM AND 0.409 INCHES MAXIMUM IN
CONSTRUCTIONONE-PIECE
PACKING RING CROSS-SECTIONAL DIAMETER0.072 INCHES NOMINAL IN
MATERIALSTEEL RETAINER
SURFACE TREATMENTCADMIUM RETAINER
RETAINER THICKNESS0.051 INCHES MINIMUM AND 0.057 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 31
1250-03Interchangeable
interchangeable cross-reference
interchangeable
GP106GInterchangeable
interchangeable cross-reference
interchangeable
12503Interchangeable
interchangeable cross-reference
interchangeable
MILM10670Interchangeable
interchangeable cross-reference
interchangeable
1176Interchangeable
interchangeable cross-reference
interchangeable
643651Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1JA8690H05?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1JA8690H05?
1JA8690H05 is a PACKING WITH RETAINER.
What parts can replace 1JA8690H05?
There are 31 known substitutes for 1JA8690H05: 1250-03, GP106G, 12503 and 28 more. Substitute compatibility should be verified for your specific system.
Is 1JA8690H05 still available?
1JA8690H05 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1JA8690H05

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026