PartsTable
Technical Data Sheet
Download PDF

1J939 — RETAINER,PACKING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

1J939: RETAINER,PACKING.

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include angle: 25.0 DEGREES MINIMUM AND 35.0 DEGREES MAXIMUM, material: PLASTIC POLYTETRAFLUOROETHYLENE OVERALL, joint_type: SCARF-BUTT RETAINER, peripheral_diameter: 4.974 INCHES MINIMUM AND 4.978 INCHES MAXIMUM IN, center_hole_diameter: 4.500 INCHES NOMINAL IN, distance_between_ends: 0.188 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-663-7035, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1J939
NSN: 5330-00-663-7035
NIINs: 006637035, 011952902
FSC: 5330 — Packing and Gasket Materials
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
angle25.0 DEGREES MINIMUM AND 35.0 DEGREES MAXIMUM
materialPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
joint_typeSCARF-BUTT RETAINER
peripheral_diameter4.974 INCHES MINIMUM AND 4.978 INCHES MAXIMUM IN
center_hole_diameter4.500 INCHES NOMINAL IN
distance_between_ends0.188 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
cross-sectional_height0.138 INCHES MINIMUM AND 0.156 INCHES MAXIMUM IN
cross-sectional_thickness0.046 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
cross-sectional_shape_styleSQUARE
material_document_and_classificationMIL-R-8791 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-663-7035
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1J939 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.046 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.138 INCHES MINIMUM AND 0.156 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-8791 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SQUARE
•
ANGLE: 25.0 DEGREES MINIMUM AND 35.0 DEGREES MAXIMUM
•
PERIPHERAL DIAMETER: 4.974 INCHES MINIMUM AND 4.978 INCHES MAXIMUM IN
•
DISTANCE BETWEEN ENDS: 0.188 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 4.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.046 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.138 INCHES MINIMUM AND 0.156 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-8791 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLESQUARE
ANGLE25.0 DEGREES MINIMUM AND 35.0 DEGREES MAXIMUM
PERIPHERAL DIAMETER4.974 INCHES MINIMUM AND 4.978 INCHES MAXIMUM IN
DISTANCE BETWEEN ENDS0.188 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
CENTER HOLE DIAMETER4.500 INCHES NOMINAL IN
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
JOINT TYPESCARF-BUTT RETAINER
SUBSTITUTES & CROSS-REFERENCES 7
MS28782Reference document
Same NSN cross-reference
Reference document — Identification reference
LA196-41955 ITEM 19Reference document
Same NSN cross-reference
Reference document — Secondary reference
SAE-AS8791Reference document
Same NSN cross-reference
Reference document — Secondary reference
8014688Reference document
Same NSN cross-reference
Reference document — Secondary reference
MS-28782-88Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LA589-41350 ITEM 12Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 1J939?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1J939?
1J939 is a RETAINER,PACKING.
What parts can replace 1J939?
There are 7 known substitutes for 1J939: MS28782, LA196-41955 ITEM 19, SAE-AS8791 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1J939?
1J939 is cataloged in the U.S. Government catalog under NSN 5330-00-663-7035. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1J939

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.