PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1J9226
1J9226 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The RING,BEARING,INNER is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 60.0 MILLIMETERS NOMINAL MM, overall_width: 22.0 MILLIMETERS NOMINAL MM, surface_finish: GROUND, style_designator: INNER RING, ROLLER, SINGLE LIP. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-740-6785, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1J9226
NSN: 3110-00-740-6785
FSC: 3110
CAGE: 11083 — CATERPILLAR INC DIV CATERPILLAR DEFENSE (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter60.0 MILLIMETERS NOMINAL MM
overall_width22.0 MILLIMETERS NOMINAL MM
surface_finishGROUND
style_designatorINNER RING, ROLLER, SINGLE LIP
smallest_outside_diameter2.8496 INCHES NOMINAL IN
standard_tolerance_designationRBEC NO.1
NSN3110-00-740-6785
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 1J9226 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
BORE SHAPE: STRAIGHT
•
BORE DIAMETER: 60.0 MILLIMETERS NOMINAL MM
•
STANDARD TOLERANCE DESIGNATION: RBEC NO.1
•
STYLE DESIGNATOR: INNER RING, ROLLER, SINGLE LIP
•
SMALLEST OUTSIDE DIAMETER: 2.8496 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH22.0 MILLIMETERS NOMINAL MM
SURFACE FINISHGROUND
BORE SHAPESTRAIGHT
BORE DIAMETER60.0 MILLIMETERS NOMINAL MM
STANDARD TOLERANCE DESIGNATIONRBEC NO.1
STYLE DESIGNATORINNER RING, ROLLER, SINGLE LIP
SMALLEST OUTSIDE DIAMETER2.8496 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
GGG-T-106Interchangeable
interchangeable cross-reference
interchangeable
C9212Interchangeable
interchangeable cross-reference
interchangeable
R12-12Interchangeable
interchangeable cross-reference
interchangeable
AVE05408Interchangeable
interchangeable cross-reference
interchangeable
AVE-R1212Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1J9226?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1J9226?
1J9226 is a RING,BEARING,INNER.
What parts can replace 1J9226?
There are 5 known substitutes for 1J9226: GGG-T-106, C9212, R12-12 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1J9226?
1J9226 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-740-6785. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1J9226

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026