1J56A6-G06 — SWITCH,ROTARY

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

1J56A6-G06: SWITCH,ROTARY.

The SWITCH,ROTARY is a the manufacturer industrial component. Key specifications include shaft_type: ROUND SINGLE ACTUATOR, shaft_length: 0.438 INCHES NOMINAL SINGLE ACTUATOR IN, thread_class: 2A SINGLE MOUNTING FACILITY A, overall_width: 1.328 INCHES MAXIMUM IN, pole_quantity: 1 EACH SECTION REAR, terminal_type: TAB, SOLDER LUG. This part is cataloged in the U.S.

Government catalog under NSN 5930-01-097-5482, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ 1J56A6-G06

NSN: 5930-01-097-5482
FSC: 5930 — Switches
CAGE: 82121 — ELECTRO SWITCH CORP. DBA ELECTRO SWITCH CORP (USA)

SPECIFICATIONS

shaft_type	ROUND SINGLE ACTUATOR
shaft_length	0.438 INCHES NOMINAL SINGLE ACTUATOR IN
thread_class	2A SINGLE MOUNTING FACILITY A
overall_width	1.328 INCHES MAXIMUM IN
pole_quantity	1 EACH SECTION REAR
terminal_type	TAB, SOLDER LUG
thread_length	0.312 INCHES NOMINAL SINGLE MOUNTING FACILITY IN
overall_height	1.250 INCHES NOMINAL IN
overall_length	2.416 INCHES NOMINAL IN
shaft_diameter	0.250 INCHES NOMINAL SINGLE ACTUATOR IN
throw_quantity	6 EACH SECTION REAR
mounting_method	THREADED BUSHING SINGLE MOUNTING FACILITY
NSN	5930-01-097-5482

COMPONENT DIAGRAM

KEY FEATURES

•

SHAFT TYPE: ROUND SINGLE ACTUATOR

•

SHAFT DIAMETER: 0.250 INCHES NOMINAL SINGLE ACTUATOR IN

•

SWITCH CONTACT BASIC DESIGN: NONPILE-UP SYMMETRICAL

•

NONTURN DEVICE RADIUS: 0.390 INCHES NOMINAL AT 3:00 OCLOCK IN

•

TERMINAL TYPE: TAB, SOLDER LUG

•

DETENT ROTATIONAL TORQUE RANGE: +0.500 TO 2.500 INCH-POUNDS SINGLE ACTUATOR IN

•

PRECIOUS MATERIAL: SILVER

TECHNICAL CHARACTERISTICS

SHAFT TYPE	ROUND SINGLE ACTUATOR
OVERALL HEIGHT	1.250 INCHES NOMINAL IN
SHAFT DIAMETER	0.250 INCHES NOMINAL SINGLE ACTUATOR IN
SWITCH CONTACT BASIC DESIGN	NONPILE-UP SYMMETRICAL
NONTURN DEVICE RADIUS	0.390 INCHES NOMINAL AT 3:00 OCLOCK IN
TERMINAL TYPE	TAB, SOLDER LUG
DETENT ROTATIONAL TORQUE RANGE	+0.500 TO 2.500 INCH-POUNDS SINGLE ACTUATOR IN
PRECIOUS MATERIAL	SILVER
CONTACT LOAD CURRENT RATING	1.0 AMPERES RESISTIVE LOAD DC AT SEA LEVEL
MOUNTING METHOD	THREADED BUSHING SINGLE MOUNTING FACILITY

OTHER ITEMS IN FSC 5930 — Switches

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5930-00-000-0117 5930-00-001-1407 5930-00-001-1890 5930-00-001-2571 5930-00-001-2575 5930-00-001-2580 5930-00-001-2608 5930-00-001-2609

SUBSTITUTES & CROSS-REFERENCES 2

1J56A6-4-G-06Reference document

Same NSN cross-reference

Reference document — Secondary reference

5930PL0881949Reference document

Same NSN cross-reference

Reference document — Informative reference only

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 1J56A6-G06?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 1J56A6-G06?

1J56A6-G06 is a SWITCH,ROTARY. It is classified as a MRO (MRO_GENERAL).

What parts can replace 1J56A6-G06?

There are 2 known substitutes for 1J56A6-G06: 1J56A6-4-G-06, 5930PL0881949. Substitute compatibility should be verified for your specific system.

What is the NSN for 1J56A6-G06?

1J56A6-G06 is cataloged in the U.S. Government catalog under NSN 5930-01-097-5482. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

1J56A6-G06 — SWITCH,ROTARY

Request a Quote — 1J56A6-G06