PartsTable
Technical Data Sheet
Download PDF

1J29-A — ROD,STRAIGHT,HEADLESS

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

1J29-A: ROD,STRAIGHT,HEADLESS.

The ROD,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include hole_diameter: 0.203 INCHES LOCATION NOT OTHERWISE SPECIFIED IN, overall_length: 12.250 INCHES NOMINAL IN, overall_diameter: 1.000 INCHES NOMINAL IN, drilled_hole_location: BOTH ENDS, distance_from_end_to_hole_center: 0.312 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-183-6100, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1J29-A
NSN: 5340-01-183-6100
FSC: 5340 — Hardware, Commercial
CAGE: 2Y614 — LINK-BELT CRANES, L.P., LLLP (USA)
SPECIFICATIONS
hole_diameter0.203 INCHES LOCATION NOT OTHERWISE SPECIFIED IN
overall_length12.250 INCHES NOMINAL IN
overall_diameter1.000 INCHES NOMINAL IN
drilled_hole_locationBOTH ENDS
distance_from_end_to_hole_center0.312 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
NSN5340-01-183-6100
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1J29-A MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 1.000 INCHES NOMINAL IN
•
DRILLED HOLE LOCATION: BOTH ENDS
•
HOLE DIAMETER: 0.203 INCHES LOCATION NOT OTHERWISE SPECIFIED IN
•
DISTANCE FROM END TO HOLE CENTER: 0.312 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS
OVERALL DIAMETER1.000 INCHES NOMINAL IN
DRILLED HOLE LOCATIONBOTH ENDS
OVERALL LENGTH12.250 INCHES NOMINAL IN
HOLE DIAMETER0.203 INCHES LOCATION NOT OTHERWISE SPECIFIED IN
DISTANCE FROM END TO HOLE CENTER0.312 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
SUBSTITUTES & CROSS-REFERENCES 1
1J29Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 1J29-A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1J29-A?
1J29-A is a ROD,STRAIGHT,HEADLESS.
What parts can replace 1J29-A?
There is 1 known substitute for 1J29-A: 1J29. Substitute compatibility should be verified for your specific system.
What is the NSN for 1J29-A?
1J29-A is cataloged in the U.S. Government catalog under NSN 5340-01-183-6100. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1J29-A

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.