1J06F3-2GW07F — SWITCH,ROTARY

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

1J06F3-2GW07F: SWITCH,ROTARY.

The SWITCH,ROTARY is a the manufacturer industrial component. Key specifications include shaft_type: ROUND, FLATTED SINGLE ACTUATOR, flat_height: 0.216 INCHES NOMINAL SINGLE ACTUATOR IN, shaft_length: 0.438 INCHES NOMINAL SINGLE ACTUATOR IN, thread_class: 2A SINGLE MOUNTING FACILITY A, pole_quantity: 1 EACH SECTION FRONT, terminal_type: TAB, SOLDER LUG. This part is cataloged in the U.S.

Government catalog under NSN 5930-00-390-9741, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ 1J06F3-2GW07F

NSN: 5930-00-390-9741
FSC: 5930 — Switches
CAGE: 54294 — SHALLCROSS INC (USA)

SPECIFICATIONS

shaft_type	ROUND, FLATTED SINGLE ACTUATOR
flat_height	0.216 INCHES NOMINAL SINGLE ACTUATOR IN
shaft_length	0.438 INCHES NOMINAL SINGLE ACTUATOR IN
thread_class	2A SINGLE MOUNTING FACILITY A
pole_quantity	1 EACH SECTION FRONT
terminal_type	TAB, SOLDER LUG
thread_length	0.437 INCHES NOMINAL SINGLE MOUNTING FACILITY IN
overall_length	1.975 INCHES NOMINAL IN
shaft_diameter	0.250 INCHES NOMINAL SINGLE ACTUATOR IN
throw_quantity	3 EACH SECTION FRONT
mounting_method	THREADED BUSHING WITH PANEL SEAL SINGLE MOUNTING FACILITY
overall_diameter	1.430 INCHES MAXIMUM IN
NSN	5930-00-390-9741

COMPONENT DIAGRAM

KEY FEATURES

•

SHAFT TYPE: ROUND, FLATTED SINGLE ACTUATOR

•

SHAFT DIAMETER: 0.250 INCHES NOMINAL SINGLE ACTUATOR IN

•

SWITCH CONTACT BASIC DESIGN: NONPILE-UP SYMMETRICAL

•

NONTURN DEVICE RADIUS: 0.375 INCHES NOMINAL AT 3:00 OCLOCK IN

•

TERMINAL TYPE: TAB, SOLDER LUG

•

OVERALL DIAMETER: 1.430 INCHES MAXIMUM IN

•

FIRST FLAT LENGTH: 0.250 INCHES NOMINAL SINGLE ACTUATOR IN

•

CONTACT LOAD CURRENT RATING: 250.0 MILLIAMPERES RESISTIVE LOAD AC AT SEA LEVEL

TECHNICAL CHARACTERISTICS

SHAFT TYPE	ROUND, FLATTED SINGLE ACTUATOR
SHAFT DIAMETER	0.250 INCHES NOMINAL SINGLE ACTUATOR IN
SWITCH CONTACT BASIC DESIGN	NONPILE-UP SYMMETRICAL
NONTURN DEVICE RADIUS	0.375 INCHES NOMINAL AT 3:00 OCLOCK IN
TERMINAL TYPE	TAB, SOLDER LUG
OVERALL DIAMETER	1.430 INCHES MAXIMUM IN
FIRST FLAT LENGTH	0.250 INCHES NOMINAL SINGLE ACTUATOR IN
CONTACT LOAD CURRENT RATING	250.0 MILLIAMPERES RESISTIVE LOAD AC AT SEA LEVEL
CONTACT LOAD CURRENT RATING	750.0 MILLIAMPERES RESISTIVE LOAD AND 100.0 MILLIAMPERES INDUCTIVE LOAD DC AT SEA LEVEL
MOUNTING METHOD	THREADED BUSHING WITH PANEL SEAL SINGLE MOUNTING FACILITY

SUBSTITUTES & CROSS-REFERENCES 4

MIL-S-3786/28Reference document

Same NSN cross-reference

Reference document — Secondary reference

MIL-DTL-3786/28Reference document

Same NSN cross-reference

Reference document — Identification reference

M3786/28-032Reference document

Same NSN cross-reference

Reference document — Secondary reference

M3786/28-EFBSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required

Ready to buy 1J06F3-2GW07F?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 1J06F3-2GW07F?

1J06F3-2GW07F is a SWITCH,ROTARY. It is classified as a MRO (MRO_GENERAL).

What parts can replace 1J06F3-2GW07F?

There are 4 known substitutes for 1J06F3-2GW07F: MIL-S-3786/28, MIL-DTL-3786/28, M3786/28-032 and 1 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 1J06F3-2GW07F?

1J06F3-2GW07F is cataloged in the U.S. Government catalog under NSN 5930-00-390-9741. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

1J06F3-2GW07F — SWITCH,ROTARY

Request a Quote — 1J06F3-2GW07F