1J-9671 — O-RING

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

1J-9671: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, temp_rating: -15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF, hardness_rating: 90.0 SHORE DUROMETER A NOMINAL, outside_diameter: 0.547 INCHES MINIMUM AND 0.569 INCHES MAXIMUM IN, center_hole_diameter: 0.409 INCHES MINIMUM AND 0.419 INCHES MAXIMUM IN, cross-sectional_height: 0.069 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-165-1980, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

1J-9671

NSN: 5331-00-165-1980
NIINs: 001651980, 014523208
FSC: 5331 — O-ring
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)

SPECIFICATIONS

material	RUBBER FLUOROCARBON CLASS FPM
temp_rating	-15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
hardness_rating	90.0 SHORE DUROMETER A NOMINAL
outside_diameter	0.547 INCHES MINIMUM AND 0.569 INCHES MAXIMUM IN
center_hole_diameter	0.409 INCHES MINIMUM AND 0.419 INCHES MAXIMUM IN
cross-sectional_height	0.069 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN
NSN	5331-00-165-1980

COMPONENT DIAGRAM

KEY FEATURES

•

TEMP RATING: -15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF

•

CROSS-SECTIONAL HEIGHT: 0.069 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN

•

OUTSIDE DIAMETER: 0.547 INCHES MINIMUM AND 0.569 INCHES MAXIMUM IN

•

HARDNESS RATING: 90.0 SHORE DUROMETER A NOMINAL

•

CENTER HOLE DIAMETER: 0.409 INCHES MINIMUM AND 0.419 INCHES MAXIMUM IN

•

MATERIAL: RUBBER FLUOROCARBON CLASS FPM

TECHNICAL CHARACTERISTICS

TEMP RATING	-15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT	0.069 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN
OUTSIDE DIAMETER	0.547 INCHES MINIMUM AND 0.569 INCHES MAXIMUM IN
HARDNESS RATING	90.0 SHORE DUROMETER A NOMINAL
CENTER HOLE DIAMETER	0.409 INCHES MINIMUM AND 0.419 INCHES MAXIMUM IN
MATERIAL	RUBBER FLUOROCARBON CLASS FPM

SUBSTITUTES & CROSS-REFERENCES 10

30096-41450 ITEM 23Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

10093348Reference document

Same NSN cross-reference

Reference document — Informative reference only

15098-14540 IT4EM 19Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

1479RA PIECE 27Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

3-905-V0709-90Reference document

Same NSN cross-reference

Reference document — Secondary reference

218-41375 ITEM 24Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Shelf-life managedNo demilitarization required

Ready to buy 1J-9671?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 1J-9671?

1J-9671 is a O-RING.

What parts can replace 1J-9671?

There are 10 known substitutes for 1J-9671: 30096-41450 ITEM 23, 10093348, 15098-14540 IT4EM 19 and 7 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 1J-9671?

1J-9671 is cataloged in the U.S. Government catalog under NSN 5331-00-165-1980. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

1J-9671 — O-RING

Request a Quote — 1J-9671