1II4B — 1II4B

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

1II4B: 1II4B.

The 1II4B is a the manufacturer industrial component. Key specifications include width: 1.125 INCHES MINIMUM AND 1.175 INCHES MAXIMUM IN, skirt_style: FLARED, inside_width: 0.222 INCHES MINIMUM AND 0.227 INCHES MAXIMUM IN, skirt_design: NONDETACHABLE, overall_depth: 0.568 INCHES MINIMUM IN, inside_diameter: 0.250 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5355-01-070-7151, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

1II4B

NSN: 5355-01-070-7151
FSC: 5355 — Knobs and Pointers
CAGE: 23480 — ELECTRONIC HARDWARE CORP DBA ELECTRONIC HARDWARE CORP (USA)

SPECIFICATIONS

width	1.125 INCHES MINIMUM AND 1.175 INCHES MAXIMUM IN
skirt_style	FLARED
inside_width	0.222 INCHES MINIMUM AND 0.227 INCHES MAXIMUM IN
skirt_design	NONDETACHABLE
overall_depth	0.568 INCHES MINIMUM IN
inside_diameter	0.250 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN
screw_drive_type	HEXAGON SOCKET
special_features	SHAFT ACCOMMODATION HOLE COUNTERBORE 0.485 IN. MIN DIA,0.188 IN. MIN DEPTH IN
style_designator	SKIRTED/ROUND WITH DOUBLE FIN LEVER
attachment_method	SETSCREWS
overall_thickness	0.752 INCHES MINIMUM AND 0.812 INCHES MAXIMUM IN
reference_marking	LINE
NSN	5355-01-070-7151

COMPONENT DIAGRAM

KEY FEATURES

•

DISTANCE FROM HOLE CENTER TO KNOB/SKIRT BASE: 0.369 INCHES MAXIMUM IN

•

INSIDE WIDTH: 0.222 INCHES MINIMUM AND 0.227 INCHES MAXIMUM IN

•

SHAFT ACCOMMODATION STYLE: FLATTED ONE SIDE

•

OVERALL THICKNESS: 0.752 INCHES MINIMUM AND 0.812 INCHES MAXIMUM IN

•

SKIRT OUTSIDE DIAMETER: 1.150 INCHES MAXIMUM IN

•

MATERIAL TRANSPARENCY: OPAQUE

•

STYLE DESIGNATOR: SKIRTED/ROUND WITH DOUBLE FIN LEVER

•

REFERENCE MARKING: LINE

TECHNICAL CHARACTERISTICS

DISTANCE FROM HOLE CENTER TO KNOB/SKIRT BASE	0.369 INCHES MAXIMUM IN
INSIDE WIDTH	0.222 INCHES MINIMUM AND 0.227 INCHES MAXIMUM IN
SHAFT ACCOMMODATION STYLE	FLATTED ONE SIDE
OVERALL THICKNESS	0.752 INCHES MINIMUM AND 0.812 INCHES MAXIMUM IN
SKIRT OUTSIDE DIAMETER	1.150 INCHES MAXIMUM IN
MATERIAL TRANSPARENCY	OPAQUE
STYLE DESIGNATOR	SKIRTED/ROUND WITH DOUBLE FIN LEVER
REFERENCE MARKING	LINE
SETSCREW HOLE QUANTITY	2
NOMINAL THREAD SIZE	0.112 INCHES SCREW HOLE IN

SUBSTITUTES & CROSS-REFERENCES 8

10086944Reference document

Same NSN cross-reference

Reference document — Informative reference only

MS91528-1II4BReference document

Same NSN cross-reference

Reference document — Secondary reference

NASM3926Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

70B-3-2DGReference document

Same NSN cross-reference

Reference document — Secondary reference

MIL-K-3926Reference document

Same NSN cross-reference

Reference document — Secondary reference

70098850Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy 1II4B?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 1II4B?

1II4B is a 1II4B.

What parts can replace 1II4B?

There are 8 known substitutes for 1II4B: 10086944, MS91528-1II4B, NASM3926 and 5 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 1II4B?

1II4B is cataloged in the U.S. Government catalog under NSN 5355-01-070-7151. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

1II4B — 1II4B

Request a Quote — 1II4B