PartsTable
Technical Data Sheet
Download PDF

1H4725 — MUFFLER,EXHAUST

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

1H4725: MUFFLER,EXHAUST.

The MUFFLER,EXHAUST is a the manufacturer industrial component. Key specifications include material: STEEL LOCATION NOT OTHERWISE SPECIFIED, body_shape: ROUND, design_type: DRY, thread_size: 3/8-16 SINGLE INLET FLANGE MOUNTING PROVISION, coolant_type: AIR, inlet_location: ON SIDE OF BODY. This part is cataloged in the U.S.

Government catalog under NSN 2990-00-836-3873, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1H4725
NSN: 2990-00-836-3873
FSC: 2990 — Miscellaneous Engine Accessories, Nonaircraft
CAGE: 11083 — CATERPILLAR INC DIV CATERPILLAR DEFENSE (USA)
SPECIFICATIONS
materialSTEEL LOCATION NOT OTHERWISE SPECIFIED
body_shapeROUND
design_typeDRY
thread_size3/8-16 SINGLE INLET FLANGE MOUNTING PROVISION
coolant_typeAIR
inlet_locationON SIDE OF BODY
overall_length21.438 INCHES NOMINAL IN
outlet_locationOFFSET IN END SECTION OF BODY
overall_diameter6.500 INCHES NOMINAL IN
special_featuresW/CLAMP ON THE OUTLET
unable_to_decodeUNABLE TO DECODE
inlet_flange_shapeSQUARE SINGLE INLET
NSN2990-00-836-3873
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available MUFFLER,EXHAUST TITLE COMPONENT PN 1H4725 MFR MUFFLER,EXHAUST
KEY FEATURES
•
INLET FLANGE SHAPE: SQUARE SINGLE INLET
•
OPERATING POSITION: UNIVERSAL
•
INLET LOCATION: ON SIDE OF BODY
•
COOLANT TYPE: AIR
•
INLET FLANGE MOUNTING PROVISION THREAD DIRECTION: RIGHT-HAND SINGLE INLET
•
DESIGN TYPE: DRY
•
OVERALL DIAMETER: 6.500 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES: 2.500 IN. C TO C DIM. OF BOLT HOLES SINGLE INLET IN
TECHNICAL CHARACTERISTICS
INLET FLANGE SHAPESQUARE SINGLE INLET
OPERATING POSITIONUNIVERSAL
INLET LOCATIONON SIDE OF BODY
COOLANT TYPEAIR
INLET FLANGE MOUNTING PROVISION THREAD DIRECTIONRIGHT-HAND SINGLE INLET
DESIGN TYPEDRY
OVERALL DIAMETER6.500 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES2.500 IN. C TO C DIM. OF BOLT HOLES SINGLE INLET IN
OVERALL LENGTH21.438 INCHES NOMINAL IN
INLET FLANGE MOUNTING HOLE DIAMETER0.188 INCHES NOMINAL SINGLE INLET IN
OTHER ITEMS IN FSC 2990 — Miscellaneous Engine Accessories, Nonaircraft
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
2990-00-096-8607 2990-00-390-3445 2990-00-459-7255 2990-00-536-2962 2990-00-903-8226 2990-01-151-5443
SUBSTITUTES & CROSS-REFERENCES 3
2990PL0954824Reference document
Same NSN cross-reference
Reference document — Informative reference only
SBM06-5002Reference document
Same NSN cross-reference
Reference document — Secondary reference
SMB06-5002Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 1H4725?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1H4725?
1H4725 is a MUFFLER,EXHAUST.
What parts can replace 1H4725?
There are 3 known substitutes for 1H4725: 2990PL0954824, SBM06-5002, SMB06-5002. Substitute compatibility should be verified for your specific system.
What is the NSN for 1H4725?
1H4725 is cataloged in the U.S. Government catalog under NSN 2990-00-836-3873. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1H4725