PartsTable
Technical Data Sheet
Download PDF

1F4095 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

1F4095: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.281 INCHES NOMINAL IN, material: STEEL BAND, overall_width: 0.906 INCHES NOMINAL IN, style_designator: CENTER MOUNT, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: ZINC BAND. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-495-3062, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1F4095
NSN: 5340-00-495-3062
FSC: 5340 — Hardware, Commercial
CAGE: 11083 — CATERPILLAR INC DIV CATERPILLAR DEFENSE (USA)
SPECIFICATIONS
diameter0.281 INCHES NOMINAL IN
materialSTEEL BAND
overall_width0.906 INCHES NOMINAL IN
style_designatorCENTER MOUNT
tongue_hole_typeROUND, UNTHREADED
surface_treatmentZINC BAND
material_thickness0.0312 INCHES NOMINAL IN
loop_inside_diameter3.625 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end2.625 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole2.250 INCHES NOMINAL IN
NSN5340-00-495-3062
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1F4095 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: CENTER MOUNT
•
DIAMETER: 0.281 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.0312 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 2.625 INCHES NOMINAL IN
•
SURFACE TREATMENT: ZINC BAND
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 2.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORCENTER MOUNT
DIAMETER0.281 INCHES NOMINAL IN
OVERALL WIDTH0.906 INCHES NOMINAL IN
MATERIAL THICKNESS0.0312 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END2.625 INCHES NOMINAL IN
SURFACE TREATMENTZINC BAND
TONGUE HOLE TYPEROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE2.250 INCHES NOMINAL IN
MATERIALSTEEL BAND
LOOP INSIDE DIAMETER3.625 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
P3978Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 1F4095?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1F4095?
1F4095 is a CLAMP,LOOP.
What parts can replace 1F4095?
There is 1 known substitute for 1F4095: P3978. Substitute compatibility should be verified for your specific system.
What is the NSN for 1F4095?
1F4095 is cataloged in the U.S. Government catalog under NSN 5340-00-495-3062. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1F4095