PartsTable
Technical Data Sheet
PartsTable / O-RING / 1E2167B
1E2167B ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, outside_diameter: 1.262 INCHES NOMINAL IN, center_hole_diameter: 0.974 INCHES MINIMUM AND 0.994 INCHES MAXIMUM IN, cross-sectional_height: 0.125 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-676-9239, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1E2167B
NSN: 5331-00-676-9239
FSC: 5331 — O-RING
CAGE: 93343 — WHITE FARM EQUIPMENT CO SUB OF TIC INVESTMENT CORP
SPECIFICATIONS
materialRUBBER SYNTHETIC
outside_diameter1.262 INCHES NOMINAL IN
center_hole_diameter0.974 INCHES MINIMUM AND 0.994 INCHES MAXIMUM IN
cross-sectional_height0.125 INCHES NOMINAL IN
NSN5331-00-676-9239
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1E2167B MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 0.974 INCHES MINIMUM AND 0.994 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.125 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 1.262 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER0.974 INCHES MINIMUM AND 0.994 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.125 INCHES NOMINAL IN
OUTSIDE DIAMETER1.262 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
24628Interchangeable
interchangeable cross-reference
interchangeable
AS568B-214Interchangeable
interchangeable cross-reference
interchangeable
PRP90219H22480Interchangeable
interchangeable cross-reference
interchangeable
904-C-69Interchangeable
interchangeable cross-reference
interchangeable
2AB5Interchangeable
interchangeable cross-reference
interchangeable
7-57-010Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1E2167B?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1E2167B?
1E2167B is a O-RING.
What parts can replace 1E2167B?
There are 22 known substitutes for 1E2167B: 24628, AS568B-214, PRP90219H22480 and 19 more. Substitute compatibility should be verified for your specific system.
Is 1E2167B still available?
1E2167B is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1E2167B

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026