PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1DME130
1DME130 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,TAPERED is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: STEEL OVERALL, cup_width: 0.7500 INCHES NOMINAL IN, cone_width: 1.0000 INCHES NOMINAL IN, bore_diameter: 1.5625 INCHES NOMINAL IN, overall_width: 0.9375 INCHES NOMINAL IN, standout_width: 0.1875 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-293-8052, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1DME130
NSN: 3110-00-293-8052
FSC: 3110
CAGE: 23382 — FWD SEAGRAVE HOLDINGS LP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
cup_width0.7500 INCHES NOMINAL IN
cone_width1.0000 INCHES NOMINAL IN
bore_diameter1.5625 INCHES NOMINAL IN
overall_width0.9375 INCHES NOMINAL IN
standout_width0.1875 INCHES NOMINAL IN
style_designatorSTRAIGHT BORE, NORMAL ANGLE
cone_corner_radius0.1400 INCHES NOMINAL IN
backface_corner_radius0.0930 INCHES NOMINAL IN
overall_outside_diameter3.1250 INCHES NOMINAL IN
retainer_fabrication_methodPRESSED
standard_tolerance_designationAFBMA CLASS 4
NSN3110-00-293-8052
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 1DME130 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL OUTSIDE DIAMETER: 3.1250 INCHES NOMINAL IN
•
RETAINER FABRICATION METHOD: PRESSED
•
CONE WIDTH: 1.0000 INCHES NOMINAL IN
•
STANDOUT WIDTH: 0.1875 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 4
•
CONE CORNER RADIUS: 0.1400 INCHES NOMINAL IN
•
CUP WIDTH: 0.7500 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL OUTSIDE DIAMETER3.1250 INCHES NOMINAL IN
RETAINER FABRICATION METHODPRESSED
CONE WIDTH1.0000 INCHES NOMINAL IN
OVERALL WIDTH0.9375 INCHES NOMINAL IN
STANDOUT WIDTH0.1875 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 4
CONE CORNER RADIUS0.1400 INCHES NOMINAL IN
CUP WIDTH0.7500 INCHES NOMINAL IN
BACKFACE CORNER RADIUS0.0930 INCHES NOMINAL IN
BORE DIAMETER1.5625 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
ZZ-T-410Interchangeable
interchangeable cross-reference
interchangeable
2610PL1748768Interchangeable
interchangeable cross-reference
interchangeable
9.00-10Interchangeable
interchangeable cross-reference
interchangeable
R71Interchangeable
interchangeable cross-reference
interchangeable
0152Interchangeable
interchangeable cross-reference
interchangeable
664-174Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1DME130?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1DME130?
1DME130 is a BEARING,ROLLER,TAPERED.
What parts can replace 1DME130?
There are 24 known substitutes for 1DME130: ZZ-T-410, 2610PL1748768, 9.00-10 and 21 more. Substitute compatibility should be verified for your specific system.
Is 1DME130 still available?
1DME130 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1DME130

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026