PartsTable
Technical Data Sheet
Download PDF

1C6913P03 — PIN,SHOULDER,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

1C6913P03: PIN,SHOULDER,HEADLESS.

The PIN,SHOULDER,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4130 OR STEEL COMP 4135 OR STEEL COMP 4137 OR STEEL COMP 4140 OVERALL, shank_length: 0.750 INCHES NOMINAL IN, thread_class: 2A A, thread_length: 0.750 INCHES NOMINAL IN, overall_length: 2.125 INCHES NOMINAL IN, shank_diameter: 0.250 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-193-7079, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1C6913P03
NSN: 5315-01-193-7079
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 07482 — GENERAL ELECTRIC COMPANY (USA)
SPECIFICATIONS
materialSTEEL COMP 4130 OR STEEL COMP 4135 OR STEEL COMP 4137 OR STEEL COMP 4140 OVERALL
shank_length0.750 INCHES NOMINAL IN
thread_class2A A
thread_length0.750 INCHES NOMINAL IN
overall_length2.125 INCHES NOMINAL IN
shank_diameter0.250 INCHES NOMINAL IN
first_end_styleCHAMFERED
hardness_rating35.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
second_end_styleCHAMFERED
special_featuresSLOT IN UNTHREADED END
style_designatorSHOULDER
thread_directionRIGHT-HAND
NSN5315-01-193-7079
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 1C6913P03 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.250 INCHES NOMINAL IN
•
FIRST END TAPER LENGTH: 0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
•
FIRST END LOCATION: THREADED END
•
SECOND END TAPER ANGLE: 45.0 DEGREES NOMINAL
•
THREAD LENGTH: 0.750 INCHES NOMINAL IN
•
FIRST END STYLE: CHAMFERED
•
HARDNESS RATING: 35.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
•
SHANK LENGTH: 0.750 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.250 INCHES NOMINAL IN
FIRST END TAPER LENGTH0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
FIRST END LOCATIONTHREADED END
SECOND END TAPER ANGLE45.0 DEGREES NOMINAL
THREAD LENGTH0.750 INCHES NOMINAL IN
FIRST END STYLECHAMFERED
HARDNESS RATING35.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
SHANK LENGTH0.750 INCHES NOMINAL IN
STYLE DESIGNATORSHOULDER
OVERALL LENGTH2.125 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 1C6913P03?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1C6913P03?
1C6913P03 is a PIN,SHOULDER,HEADLESS.
What is the NSN for 1C6913P03?
1C6913P03 is cataloged in the U.S. Government catalog under NSN 5315-01-193-7079. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1C6913P03

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.