PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1C601000
1C601000 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RING,WIPER is a the manufacturer industrial component. Key specifications include material: UNABLE TO DECODE, ring_style: CONCENTRIC, inside_diameter: 3.750 INCHES NOMINAL IN, outside_diameter: 4.015 INCHES NOMINAL IN, material_thickness: 0.200 INCHES NOMINAL IN, outer_edge_thickness: 0.150 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-064-7017, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1C601000
NSN: 5330-00-064-7017
FSC: 5330
CAGE: 02614 — CASCADE CORP (USA)
SPECIFICATIONS
materialUNABLE TO DECODE
ring_styleCONCENTRIC
inside_diameter3.750 INCHES NOMINAL IN
outside_diameter4.015 INCHES NOMINAL IN
material_thickness0.200 INCHES NOMINAL IN
outer_edge_thickness0.150 INCHES NOMINAL IN
cross-sectional_shape_styleOUTSIDE GROOVED, CONCAVE FACE
NSN5330-00-064-7017
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1C601000 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTER EDGE THICKNESS: 0.150 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 4.015 INCHES NOMINAL IN
•
MATERIAL: UNABLE TO DECODE
•
RING STYLE: CONCENTRIC
•
CROSS-SECTIONAL SHAPE STYLE: OUTSIDE GROOVED, CONCAVE FACE
•
MATERIAL THICKNESS: 0.200 INCHES NOMINAL IN
•
INSIDE DIAMETER: 3.750 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OUTER EDGE THICKNESS0.150 INCHES NOMINAL IN
OUTSIDE DIAMETER4.015 INCHES NOMINAL IN
MATERIALUNABLE TO DECODE
RING STYLECONCENTRIC
CROSS-SECTIONAL SHAPE STYLEOUTSIDE GROOVED, CONCAVE FACE
MATERIAL THICKNESS0.200 INCHES NOMINAL IN
INSIDE DIAMETER3.750 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
160-1000Interchangeable
interchangeable cross-reference
interchangeable
160-100058-003Interchangeable
interchangeable cross-reference
interchangeable
601000Interchangeable
interchangeable cross-reference
interchangeable
0164-001Interchangeable
interchangeable cross-reference
interchangeable
0164-01Interchangeable
interchangeable cross-reference
interchangeable
2134153G2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1C601000?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1C601000?
1C601000 is a RING,WIPER.
What parts can replace 1C601000?
There are 15 known substitutes for 1C601000: 160-1000, 160-100058-003, 601000 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1C601000?
1C601000 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-064-7017. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1C601000

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026