PartsTable
Technical Data Sheet
Download PDF

1C5714P41 — STANDOFF,THREADED,SPACING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

1C5714P41: STANDOFF,THREADED,SPACING.

The STANDOFF,THREADED,SPACING is a the manufacturer industrial component. Key specifications include length: 1.750 INCHES NOMINAL IN, diameter: 0.625 INCHES NOMINAL IN, material: STEEL OVERALL, thread_class: 2B LEFT INTERNAL (INCLUDES THRU THREAD), thread_length: 0.500 INCHES MINIMUM LEFT INTERNAL (INCLUDES THRU THREAD) IN, special_features: MEDIUM DIAMOND KNURL ON SURFACE. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-473-6937, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1C5714P41
NSN: 5340-01-473-6937
FSC: 5340 — Hardware, Commercial
CAGE: 07482 — GENERAL ELECTRIC COMPANY (USA)
SPECIFICATIONS
length1.750 INCHES NOMINAL IN
diameter0.625 INCHES NOMINAL IN
materialSTEEL OVERALL
thread_class2B LEFT INTERNAL (INCLUDES THRU THREAD)
thread_length0.500 INCHES MINIMUM LEFT INTERNAL (INCLUDES THRU THREAD) IN
special_featuresMEDIUM DIAMOND KNURL ON SURFACE
style_designatorLEFT INTERNAL THREAD
thread_directionRIGHT-HAND LEFT INTERNAL (INCLUDES THRU THREAD)
nominal_thread_size0.3125 INCHES LEFT INTERNAL (INCLUDES THRU THREAD) IN
cross-sectional_shapeROUND
thread_quantity_per_inch24 LEFT INTERNAL (INCLUDES THRU THREAD)
thread_series_designatorUNF LEFT INTERNAL (INCLUDES THRU THREAD)
NSN5340-01-473-6937
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1C5714P41 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 1.750 INCHES NOMINAL IN
•
THREAD LENGTH: 0.500 INCHES MINIMUM LEFT INTERNAL (INCLUDES THRU THREAD) IN
•
STYLE DESIGNATOR: LEFT INTERNAL THREAD
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE 1010-1030 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
DIAMETER: 0.625 INCHES NOMINAL IN
•
THREAD DIRECTION: RIGHT-HAND LEFT INTERNAL (INCLUDES THRU THREAD)
•
NOMINAL THREAD SIZE: 0.3125 INCHES LEFT INTERNAL (INCLUDES THRU THREAD) IN
•
CROSS-SECTIONAL SHAPE: ROUND
TECHNICAL CHARACTERISTICS
LENGTH1.750 INCHES NOMINAL IN
THREAD LENGTH0.500 INCHES MINIMUM LEFT INTERNAL (INCLUDES THRU THREAD) IN
STYLE DESIGNATORLEFT INTERNAL THREAD
MATERIAL DOCUMENT AND CLASSIFICATIONSAE 1010-1030 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
DIAMETER0.625 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND LEFT INTERNAL (INCLUDES THRU THREAD)
NOMINAL THREAD SIZE0.3125 INCHES LEFT INTERNAL (INCLUDES THRU THREAD) IN
CROSS-SECTIONAL SHAPEROUND
SPECIAL FEATURESMEDIUM DIAMOND KNURL ON SURFACE
THREAD CLASS2B LEFT INTERNAL (INCLUDES THRU THREAD)
SUBSTITUTES & CROSS-REFERENCES 1
1C5714Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 1C5714P41?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1C5714P41?
1C5714P41 is a STANDOFF,THREADED,SPACING.
What parts can replace 1C5714P41?
There is 1 known substitute for 1C5714P41: 1C5714. Substitute compatibility should be verified for your specific system.
What is the NSN for 1C5714P41?
1C5714P41 is cataloged in the U.S. Government catalog under NSN 5340-01-473-6937. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1C5714P41

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.