PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1C520J
1C520J ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The BOLT,MACHINE is a the manufacturer industrial component. Key specifications include head_style: HEXAGON, head_height: 0.195 INCHES MINIMUM AND 0.211 INCHES MAXIMUM IN, thread_class: 2A A, thread_length: 0.875 INCHES MINIMUM AND 1.062 INCHES MAXIMUM IN, surface_finish: 63.0 MICROINCHES THREADS, fastener_length: 1.188 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-226-4829, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1C520J
NSN: 5306-00-226-4829
FSC: 5306
CAGE: 12603 — CLARK EQUIPMENT CO (USA)
SPECIFICATIONS
head_styleHEXAGON
head_height0.195 INCHES MINIMUM AND 0.211 INCHES MAXIMUM IN
thread_class2A A
thread_length0.875 INCHES MINIMUM AND 1.062 INCHES MAXIMUM IN
surface_finish63.0 MICROINCHES THREADS
fastener_length1.188 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
features_providedFINISHED HEAD
surface_treatmentZINC AND CHROMATE OVERALL
width_between_flats0.489 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
nominal_thread_diameter0.312 INCHES IN
minimum_tensile_strength150000 POUNDS PER SQUARE INCH LBS
NSN5306-00-226-4829
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 1C520J · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD STYLE: HEXAGON
•
MATERIAL: STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1021 OR STEEL COMP 1022 OR STEEL COMP 1023 OR STEEL COMP 1025 OR STEEL COMP 1026 OR STEEL COMP 1029 OR STEEL COMP 1030 OR STEEL COMP 1033 OR STEEL COMP 1034 OR STEEL COMP 1035 OR STEEL COMP 1037 OR STEEL COMP 1038 OR STEEL COMP 1039 OR STEEL COMP 1040 OR STEEL COMP 1524 OR STEEL COMP 1527 OR STEEL COMP 1536 OR STEEL COMP 1541 OVERALL
•
SURFACE FINISH: 63.0 MICROINCHES THREADS
•
FEATURES PROVIDED: FINISHED HEAD
•
THREAD LENGTH: 0.875 INCHES MINIMUM AND 1.062 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
•
WIDTH BETWEEN FLATS: 0.489 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
•
THREAD QUANTITY PER INCH: 18
TECHNICAL CHARACTERISTICS (FLIS)
HEAD STYLEHEXAGON
MATERIALSTEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1021 OR STEEL COMP 1022 OR STEEL COMP 1023 OR STEEL COMP 1025 OR STEEL COMP 1026 OR STEEL COMP 1029 OR STEEL COMP 1030 OR STEEL COMP 1033 OR STEEL COMP 1034 OR STEEL COMP 1035 OR STEEL COMP 1037 OR STEEL COMP 1038 OR STEEL COMP 1039 OR STEEL COMP 1040 OR STEEL COMP 1524 OR STEEL COMP 1527 OR STEEL COMP 1536 OR STEEL COMP 1541 OVERALL
SURFACE FINISH63.0 MICROINCHES THREADS
FEATURES PROVIDEDFINISHED HEAD
THREAD LENGTH0.875 INCHES MINIMUM AND 1.062 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OVERALL
WIDTH BETWEEN FLATS0.489 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
THREAD QUANTITY PER INCH18
SURFACE TREATMENTZINC AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONASTM B633 TY 2 SC 3 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
FFS85Upgraded Successor
successor cross-reference
successor
186274Upgraded Successor
successor cross-reference
successor
MS90725-52Upgraded Successor
successor cross-reference
successor
0251428Upgraded Successor
successor cross-reference
successor
MS90726-40Upgraded Successor
successor cross-reference
successor
301551Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1C520J?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1C520J?
1C520J is a BOLT,MACHINE.
What parts can replace 1C520J?
There are 27 known substitutes for 1C520J: FFS85, 186274, MS90725-52 and 24 more. Substitute compatibility should be verified for your specific system.
Is 1C520J still available?
1C520J is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1C520J

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026