PartsTable
Technical Data Sheet
Download PDF

1C01282HHJ0750A — HOSE ASSEMBLY,NONMETALLIC

✓ Government record, cited
— · PIPE SECTION
PRODUCT OVERVIEW

1C01282HHJ0750A: HOSE ASSEMBLY,NONMETALLIC.

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include temp_rating: -40.0 FAHRENHEIT AND 212.0 FAHRENHEIT SINGLE RESPONSE DEGF, thread_class: 3B SECOND END, connection_type: THREADED INTERNAL TUBE FIRST END, inside_diameter: 0.500 INCHES NOMINAL IN, connection_style: SWIVEL NUT, GASKET SEAL SECOND END, outside_diameter: 0.790 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 4720-01-367-0008, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1C01282HHJ0750A
NSN: 4720-01-367-0008
FSC: 4720 — Hose and Flexible Tubing
CAGE: 01276 — DANFOSS POWER SOLUTIONS II, LLC (USA)
SPECIFICATIONS
temp_rating-40.0 FAHRENHEIT AND 212.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_class3B SECOND END
connection_typeTHREADED INTERNAL TUBE FIRST END
inside_diameter0.500 INCHES NOMINAL IN
connection_styleSWIVEL NUT, GASKET SEAL SECOND END
outside_diameter0.790 INCHES NOMINAL IN
special_featuresCRIMPED FITTINGS
thread_directionRIGHT-HAND SECOND END
operating_pressure3500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure14000.0 POUNDS PER SQUARE INCH LBS
nominal_thread_size1.062 INCHES SECOND END IN
end_connection_designSTRAIGHT SECOND END
NSN4720-01-367-0008
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: 1C01282HHJ0750A · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MEASURING METHOD AND LENGTH: 75.000 INCHES NOMINAL OVERALL IN
•
TEMP RATING: -40.0 FAHRENHEIT AND 212.0 FAHRENHEIT SINGLE RESPONSE DEGF
•
MINIMUM INSIDE BENDING RADIUS: 3.500 INCHES IN
•
CONNECTION STYLE: SWIVEL NUT, GASKET SEAL SECOND END
•
END CONNECTION DESIGN: STRAIGHT FIRST END
•
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
TECHNICAL CHARACTERISTICS
MEASURING METHOD AND LENGTH75.000 INCHES NOMINAL OVERALL IN
TEMP RATING-40.0 FAHRENHEIT AND 212.0 FAHRENHEIT SINGLE RESPONSE DEGF
MINIMUM INSIDE BENDING RADIUS3.500 INCHES IN
CONNECTION STYLESWIVEL NUT, GASKET SEAL SECOND END
CONNECTION STYLESWIVEL NUT, GASKET SEAL FIRST END
END CONNECTION DESIGNSTRAIGHT FIRST END
END CONNECTION DESIGNSTRAIGHT SECOND END
LAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
CONNECTION TYPETHREADED INTERNAL TUBE SECOND END
CONNECTION TYPETHREADED INTERNAL TUBE FIRST END
SUBSTITUTES & CROSS-REFERENCES 4
44Q645-D0Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
44Q645D56Reference document
Same NSN cross-reference
Reference document — Secondary reference
44Q645D38Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
F4310606-8-10-8-75.00Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 1C01282HHJ0750A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1C01282HHJ0750A?
1C01282HHJ0750A is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace 1C01282HHJ0750A?
There are 4 known substitutes for 1C01282HHJ0750A: 44Q645-D0, 44Q645D56, 44Q645D38 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1C01282HHJ0750A?
1C01282HHJ0750A is cataloged in the U.S. Government catalog under NSN 4720-01-367-0008. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1C01282HHJ0750A

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.