PartsTable
Technical Data Sheet
Download PDF

1C01270HHH0241 — HOSE ASSEMBLY,NONMETALLIC

✓ Government record, cited
— · PIPE SECTION
PRODUCT OVERVIEW

1C01270HHH0241: HOSE ASSEMBLY,NONMETALLIC.

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include flow_angle: 45.0 DEGREES SECOND END, seat_angle: 37.0 DEGREES SECOND END, temp_rating: -50.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF, thread_class: 2B SECOND END, connection_type: THREADED INTERNAL TUBE SECOND END, inside_diameter: 0.500 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 4720-01-355-9012, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1C01270HHH0241
NSN: 4720-01-355-9012
FSC: 4720 — Hose and Flexible Tubing
CAGE: 01276 — DANFOSS POWER SOLUTIONS II, LLC (USA)
SPECIFICATIONS
flow_angle45.0 DEGREES SECOND END
seat_angle37.0 DEGREES SECOND END
temp_rating-50.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_class2B SECOND END
connection_typeTHREADED INTERNAL TUBE SECOND END
inside_diameter0.500 INCHES NOMINAL IN
connection_styleSWIVEL NUT FLARE SECOND END
outside_diameter0.800 INCHES NOMINAL IN
special_featuresALL HYDRAULIC FLUID CONTACT SURFACES AND ASSOCIATED RESIDUAL HYDRAULIC FLUID SHALL BE IN ACCORDANCE WITH MIL-STD-1246,CLEANLINESS LEVEL 200
thread_directionRIGHT-HAND FIRST END
operating_pressure3500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure14000.0 POUNDS PER SQUARE INCH LBS
NSN4720-01-355-9012
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: 1C01270HHH0241 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLOW ANGLE: 45.0 DEGREES SECOND END
•
MEASURING METHOD AND LENGTH: 24.125 INCHES NOMINAL OVERALL IN
•
TEMP RATING: -50.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF
•
MINIMUM INSIDE BENDING RADIUS: 5.000 INCHES IN
•
CONNECTION STYLE: SWIVEL NUT FLARE SECOND END
•
END CONNECTION DESIGN: ELBOW SECOND END
TECHNICAL CHARACTERISTICS
FLOW ANGLE45.0 DEGREES SECOND END
MEASURING METHOD AND LENGTH24.125 INCHES NOMINAL OVERALL IN
TEMP RATING-50.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF
MINIMUM INSIDE BENDING RADIUS5.000 INCHES IN
CONNECTION STYLESWIVEL NUT FLARE SECOND END
CONNECTION STYLESWIVEL NUT, GASKET SEAL FIRST END
END CONNECTION DESIGNELBOW SECOND END
END CONNECTION DESIGNSTRAIGHT FIRST END
LAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER, ETHYLENE PROPYLENE
CONNECTION TYPETHREADED INTERNAL TUBE SECOND END
SUBSTITUTES & CROSS-REFERENCES 2
12553682-2Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
12553682Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedAcquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 1C01270HHH0241?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1C01270HHH0241?
1C01270HHH0241 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace 1C01270HHH0241?
There are 2 known substitutes for 1C01270HHH0241: 12553682-2, 12553682. Substitute compatibility should be verified for your specific system.
What is the NSN for 1C01270HHH0241?
1C01270HHH0241 is cataloged in the U.S. Government catalog under NSN 4720-01-355-9012. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1C01270HHH0241

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.