PartsTable
Technical Data Sheet
Download PDF

1B1069 — SEAL,PLAIN ENCASED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

1B1069: SEAL,PLAIN ENCASED.

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: LEATHER SEALING ELEMENT, case_style: SQUARE, seal_width: 0.438 INCHES NOMINAL IN, housing_bore_diameter: 1.828 INCHES NOMINAL IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 1.000 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-363-6380, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1B1069
NSN: 5330-00-363-6380
FSC: 5330 — Packing and Gasket Materials
CAGE: 11083 — CATERPILLAR INC DIV CATERPILLAR DEFENSE (USA)
SPECIFICATIONS
materialLEATHER SEALING ELEMENT
case_styleSQUARE
seal_width0.438 INCHES NOMINAL IN
housing_bore_diameter1.828 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter1.000 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-363-6380
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1B1069 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.438 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: ANGULAR
•
HOUSING BORE DIAMETER: 1.828 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT DIAMETER: 1.000 INCHES NOMINAL IN
•
MATERIAL: STEEL CASE
TECHNICAL CHARACTERISTICS
SEAL WIDTH0.438 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR
HOUSING BORE DIAMETER1.828 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
CASE STYLESQUARE
ACCOMMODATED SHAFT DIAMETER1.000 INCHES NOMINAL IN
MATERIALSTEEL CASE
MATERIALLEATHER SEALING ELEMENT
SUBSTITUTES & CROSS-REFERENCES 2
10202AReference document
Same NSN cross-reference
Reference document — Secondary reference
00044Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 1B1069?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1B1069?
1B1069 is a SEAL,PLAIN ENCASED.
What parts can replace 1B1069?
There are 2 known substitutes for 1B1069: 10202A, 00044. Substitute compatibility should be verified for your specific system.
What is the NSN for 1B1069?
1B1069 is cataloged in the U.S. Government catalog under NSN 5330-00-363-6380. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1B1069