PartsTable
Technical Data Sheet
Download PDF

19T2712 — PIN,STRAIGHT,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

19T2712: PIN,STRAIGHT,HEADLESS.

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, first_end_style: CHAMFERED, pin_overall_length: 9.250 INCHES NOMINAL IN, first_hole_diameter: 0.344 INCHES NOMINAL IN, pin_overall_diameter: 1.5000 INCHES NOMINAL IN, second_hole_diameter: 0.344 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-273-8052, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
19T2712
NSN: 5315-00-273-8052
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 27315 — MORRIS MATERIAL HANDLING, INC. (USA)
SPECIFICATIONS
materialSTEEL OVERALL
first_end_styleCHAMFERED
pin_overall_length9.250 INCHES NOMINAL IN
first_hole_diameter0.344 INCHES NOMINAL IN
pin_overall_diameter1.5000 INCHES NOMINAL IN
second_hole_diameter0.344 INCHES NOMINAL IN
first_end_taper_angle30.0 DEGREES NOMINAL
first_end_taper_length0.125 INCHES NOMINAL IN
second_end_relationship_with_first_endIDENTICAL
distance_from_centerline_of_hole_to_end_of_pin0.375 INCHES NOMINAL IN
NSN5315-00-273-8052
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 19T2712 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END TAPER LENGTH: 0.125 INCHES NOMINAL IN
•
FIRST END STYLE: CHAMFERED
•
FIRST HOLE DIAMETER: 0.344 INCHES NOMINAL IN
•
FIRST END TAPER ANGLE: 30.0 DEGREES NOMINAL
•
PIN OVERALL DIAMETER: 1.5000 INCHES NOMINAL IN
•
PIN OVERALL LENGTH: 9.250 INCHES NOMINAL IN
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
SECOND HOLE DIAMETER: 0.344 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
FIRST END TAPER LENGTH0.125 INCHES NOMINAL IN
FIRST END STYLECHAMFERED
FIRST HOLE DIAMETER0.344 INCHES NOMINAL IN
FIRST END TAPER ANGLE30.0 DEGREES NOMINAL
PIN OVERALL DIAMETER1.5000 INCHES NOMINAL IN
PIN OVERALL LENGTH9.250 INCHES NOMINAL IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
SECOND HOLE DIAMETER0.344 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN0.375 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 19T2712?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 19T2712?
19T2712 is a PIN,STRAIGHT,HEADLESS.
What is the NSN for 19T2712?
19T2712 is cataloged in the U.S. Government catalog under NSN 5315-00-273-8052. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 19T2712

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.