PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 19996198
19996198 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include hole_diameter: 0.090 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 1.380 INCHES NOMINAL IN, overall_length: 1.380 INCHES NOMINAL IN, outside_corner_radius: 0.130 INCHES NOMINAL IN, cross-sectional_thickness: 0.016 INCHES NOMINAL IN, environmental_attribute_code: ASBESTOS ALTERNATIVE PRODUCTS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-388-4515, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
19996198
NSN: 5330-01-388-4515
FSC: 5330
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
hole_diameter0.090 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width1.380 INCHES NOMINAL IN
overall_length1.380 INCHES NOMINAL IN
special_featuresONE BOLT HOLE 0.230 IN. DIA; FOUR BOLT HOLES 0.125 IN. DIA; ONE SLOT 0.655 IN. LONG BY 0.093 IN. WIDE; CONTAINS NON-ASBESTOS MATERIAL IN
bolt_hole_quantity1
outside_corner_radius0.130 INCHES NOMINAL IN
cross-sectional_thickness0.016 INCHES NOMINAL IN
environmental_attribute_codeASBESTOS ALTERNATIVE PRODUCTS
outside_edge_to_bolt_hole_center_distance_along_width0.127 INCHES NOMINAL IN
outside_edge_to_bolt_hole_center_distance_along_length0.127 INCHES NOMINAL IN
center_to_center_distance_between_bolt_holes_along_width1.125 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
center_to_center_distance_between_bolt_holes_along_length1.125 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
NSN5330-01-388-4515
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 19996198 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ENVIRONMENTAL ATTRIBUTE CODE: ASBESTOS ALTERNATIVE PRODUCTS
•
BOLT HOLE QUANTITY: 1
•
CROSS-SECTIONAL THICKNESS: 0.016 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.090 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH: 1.125 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH: 0.127 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
ENVIRONMENTAL ATTRIBUTE CODEASBESTOS ALTERNATIVE PRODUCTS
BOLT HOLE QUANTITY1
CROSS-SECTIONAL THICKNESS0.016 INCHES NOMINAL IN
OVERALL WIDTH1.380 INCHES NOMINAL IN
HOLE DIAMETER0.090 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH1.125 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OVERALL LENGTH1.380 INCHES NOMINAL IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH0.127 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH1.125 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OUTSIDE CORNER RADIUS0.130 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
72534Interchangeable
interchangeable cross-reference
interchangeable
122521Interchangeable
interchangeable cross-reference
interchangeable
PA2020Interchangeable
interchangeable cross-reference
interchangeable
67712Interchangeable
interchangeable cross-reference
interchangeable
68167Interchangeable
interchangeable cross-reference
interchangeable
NAVAL REPAIR PARTInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 19996198?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 19996198?
19996198 is a GASKET.
What parts can replace 19996198?
There are 11 known substitutes for 19996198: 72534, 122521, PA2020 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 19996198?
19996198 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-388-4515. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 19996198

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026