PartsTable
Technical Data Sheet
PartsTable / MRO / 19982
19982 ✓ Verified by PartsTable
Trust · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

Horizontal viewing stand. Soft inner lining. Multiple viewing angles.

Holes for buttons and camera. . Key specifications include height: 0.278 INCHES NOMINAL IN, length: 10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT, diameter: 0.370 INCHES NOMINAL IN, material: ALUMINUM ALLOY 2024, head_style: ROUND, shaft_type: ROUND, FLAT, UNDERCUT SINGLE ACTUATOR.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-281-7521, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 19982
NSN: 5315-00-281-7521
FSC: 5315
CAGE: 11406 — REXNORD HOLDINGS INC (USA)
SPECIFICATIONS
height0.278 INCHES NOMINAL IN
length10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT
diameter0.370 INCHES NOMINAL IN
materialALUMINUM ALLOY 2024
head_styleROUND
shaft_typeROUND, FLAT, UNDERCUT SINGLE ACTUATOR
flat_height0.100 INCHES NOMINAL SINGLE ACTUATOR IN
shaft_length0.281 INCHES NOMINAL SINGLE ACTUATOR IN
thread_class2A SINGLE MOUNTING FACILITY A
leg_thickness0.040 INCHES NOMINAL IN
overall_width11.250 INCHES MAXIMUM IN
pole_quantity1 SINGLE SECTION REAR
NSN5315-00-281-7521
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 19982 · Trust ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEIGHT: 0.278 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
UNDER HEAD LENGTH: 1.500 INCHES NOMINAL IN
•
HARDNESS RATING: 55.0 ROCKWELL C MINIMUM AND 60.0 ROCKWELL C MAXIMUM OVERALL
•
PIN HEAD DIAMETER: 0.648 INCHES NOMINAL IN
•
DIAMETER: 0.370 INCHES NOMINAL IN
•
HEAD STYLE: ROUND
•
STYLE DESIGNATOR: STRAIGHT
TECHNICAL CHARACTERISTICS (FLIS)
HEIGHT0.278 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
UNDER HEAD LENGTH1.500 INCHES NOMINAL IN
HARDNESS RATING55.0 ROCKWELL C MINIMUM AND 60.0 ROCKWELL C MAXIMUM OVERALL
PIN HEAD DIAMETER0.648 INCHES NOMINAL IN
DIAMETER0.370 INCHES NOMINAL IN
HEAD STYLEROUND
STYLE DESIGNATORSTRAIGHT
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN0.312 INCHES NOMINAL IN
HOLE ARRANGEMENT STYLEONE END DRILLED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
19982Interchangeable
interchangeable cross-reference
interchangeable
1M57258Interchangeable
interchangeable cross-reference
interchangeable
1MA160B04-10227Interchangeable
interchangeable cross-reference
interchangeable
PA110-291Interchangeable
interchangeable cross-reference
interchangeable
M81757/9-3Interchangeable
interchangeable cross-reference
interchangeable
MIL-PRF-81757Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 19982?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 19982?
19982 is a SWITCH,ROTARY manufactured by Trust. It is classified as a MRO (MRO_GENERAL).
What parts can replace 19982?
There are 6 known substitutes for 19982: 19982, 1M57258, 1MA160B04-10227 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 19982?
19982 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-281-7521. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 19982

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026