PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 19954-2
19954-2 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BUSHING,SLEEVE is a the manufacturer industrial component. Key specifications include material: WOOL OVERALL, outside_diameter: 4.677 INCHES MINIMUM AND 4.687 INCHES MAXIMUM IN, style_designator: CIRCULAR, aperture_diameter: 4.000 INCHES NOMINAL IN, cross-sectional_thickness: 0.062 INCHES NOMINAL IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-383-8701, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
19954-2
NSN: 5330-00-383-8701
FSC: 5330
CAGE: 64829 — ARVINMERITOR INC (USA)
SPECIFICATIONS
materialWOOL OVERALL
outside_diameter4.677 INCHES MINIMUM AND 4.687 INCHES MAXIMUM IN
style_designatorCIRCULAR
aperture_diameter4.000 INCHES NOMINAL IN
cross-sectional_thickness0.062 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-00-383-8701
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 19954-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 4.677 INCHES MINIMUM AND 4.687 INCHES MAXIMUM IN
•
MATERIAL: WOOL OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
STYLE DESIGNATOR: CIRCULAR
•
APERTURE DIAMETER: 4.000 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.062 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER4.677 INCHES MINIMUM AND 4.687 INCHES MAXIMUM IN
MATERIALWOOL OVERALL
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
STYLE DESIGNATORCIRCULAR
APERTURE DIAMETER4.000 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.062 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
MILE1D5-1522Interchangeable
interchangeable cross-reference
interchangeable
MIL-E-1/1522Interchangeable
interchangeable cross-reference
interchangeable
5795Interchangeable
interchangeable cross-reference
interchangeable
FF-B-187/01-593Interchangeable
interchangeable cross-reference
interchangeable
FF-B-187/1Interchangeable
interchangeable cross-reference
interchangeable
21776Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 19954-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 19954-2?
19954-2 is a BUSHING,SLEEVE.
What parts can replace 19954-2?
There are 24 known substitutes for 19954-2: MILE1D5-1522, MIL-E-1/1522, 5795 and 21 more. Substitute compatibility should be verified for your specific system.
Is 19954-2 still available?
19954-2 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 19954-2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026