Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The GASKET is a the manufacturer industrial component. Key specifications include material: PAPER AND GLUE OVERALL, hole_diameter: 0.265 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, outside_diameter: 3.521 INCHES MINIMUM AND 3.541 INCHES MAXIMUM IN, special_features: TWO BOLT HOLES 0.218 IN. DIA IN, bolt_circle_diameter: 3.000 INCHES NOMINAL IN, cross-sectional_thickness: 0.010 INCHES MINIMUM AND 0.015 INCHES MAXIMUM IN.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-375-1690, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
199413056
NSN:5330-00-375-1690 FSC:5330 CAGE:0ATF2 — L & L BOILER MAINTENANCE INC (USA)
SPECIFICATIONS
material
PAPER AND GLUE OVERALL
hole_diameter
0.265 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
outside_diameter
3.521 INCHES MINIMUM AND 3.541 INCHES MAXIMUM IN
special_features
TWO BOLT HOLES 0.218 IN. DIA IN
bolt_hole_quantity
8
bolt_circle_diameter
3.000 INCHES NOMINAL IN
cross-sectional_thickness
0.010 INCHES MINIMUM AND 0.015 INCHES MAXIMUM IN
cross-sectional_shape_style
SOLID SINGLE OR COMPOSITION
material_document_and_classification
MIL-G-12803,NO. +3415-A MIL SPEC ALL MATERIAL RESPONSES OVERALL
NSN
5330-00-375-1690
COMPONENT DIAGRAM
KEY FEATURES
•
HOLE DIAMETER: 0.265 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-12803,NO. +3415-A MIL SPEC ALL MATERIAL RESPONSES OVERALL
•
CROSS-SECTIONAL THICKNESS: 0.010 INCHES MINIMUM AND 0.015 INCHES MAXIMUM IN
•
BOLT CIRCLE DIAMETER: 3.000 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
BOLT HOLE QUANTITY: 8
•
MATERIAL: PAPER AND GLUE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
HOLE DIAMETER
0.265 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
MATERIAL DOCUMENT AND CLASSIFICATION
MIL-G-12803,NO. +3415-A MIL SPEC ALL MATERIAL RESPONSES OVERALL