PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1993764-7
1993764-7 ✓ Verified by PartsTable
— · HOSE FITTING
WHAT YOU NEED TO KNOW
PTFE tape on tapered threads (NPT/BSPT) JIC/AN flare connections seal metal-to-metal — no tape
NPT != BSPT — look identical, NOT interchangeable
PRODUCT OVERVIEW

RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include material: STEEL OVERALL, overall_width: 0.276 INCHES NOMINAL IN, inside_diameter: 0.354 INCHES MINIMUM AND 0.433 INCHES MAXIMUM IN, surface_treatment: ZINC OVERALL, fastening_device_type: SPRING TENSION. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-00-541-5538, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1993764-7
NSN: 4730-00-541-5538
FSC: 4730
CAGE: 19315 — HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS FORMER BENDIX NAVIGATION AND CONTROL SYSTEMS (USA)
SPECIFICATIONS
materialSTEEL OVERALL
overall_width0.276 INCHES NOMINAL IN
inside_diameter0.354 INCHES MINIMUM AND 0.433 INCHES MAXIMUM IN
surface_treatmentZINC OVERALL
fastening_device_typeSPRING TENSION
NSN4730-00-541-5538
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: 1993764-7 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENING DEVICE TYPE: SPRING TENSION
•
MATERIAL: STEEL OVERALL
•
INSIDE DIAMETER: 0.354 INCHES MINIMUM AND 0.433 INCHES MAXIMUM IN
•
SURFACE TREATMENT: ZINC OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
FASTENING DEVICE TYPESPRING TENSION
MATERIALSTEEL OVERALL
OVERALL WIDTH0.276 INCHES NOMINAL IN
INSIDE DIAMETER0.354 INCHES MINIMUM AND 0.433 INCHES MAXIMUM IN
SURFACE TREATMENTZINC OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
2X132AInterchangeable
interchangeable cross-reference
interchangeable
0911Interchangeable
interchangeable cross-reference
interchangeable
566Interchangeable
interchangeable cross-reference
interchangeable
L225J2K0Interchangeable
interchangeable cross-reference
interchangeable
10-1000-11Interchangeable
interchangeable cross-reference
interchangeable
0911WIDTH276Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1993764-7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1993764-7?
1993764-7 is a RESISTOR,FIXED,WIRE WOUND,INDUCT.
What parts can replace 1993764-7?
There are 6 known substitutes for 1993764-7: 2X132A, 0911, 566 and 3 more. Substitute compatibility should be verified for your specific system.
Is 1993764-7 still available?
1993764-7 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1993764-7

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026