PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 199124R91
199124R91 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: SQUARE, seal_width: 0.562 INCHES NOMINAL IN, outside_diameter: 6.256 INCHES NOMINAL IN, surface_treatment: PLASTIC CASE, housing_bore_diameter: 6.250 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-940-9484, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
199124R91
NSN: 5330-00-940-9484
FSC: 5330
CAGE: 92679 — NAVISTAR INTL CORP MELROSE PARK ENGINE PLANT LOCATION /MELROSE PARK/ (USA)
SPECIFICATIONS
materialSTEEL CASE
case_styleSQUARE
seal_width0.562 INCHES NOMINAL IN
outside_diameter6.256 INCHES NOMINAL IN
surface_treatmentPLASTIC CASE
housing_bore_diameter6.250 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter4.500 INCHES NOMINAL IN
NSN5330-00-940-9484
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 199124R91 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT: PLASTIC CASE
•
ACCOMMODATED SHAFT DIAMETER: 4.500 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 6.250 INCHES NOMINAL IN
•
MATERIAL: STEEL CASE
•
SEAL WIDTH: 0.562 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 6.256 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: ANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENTPLASTIC CASE
ACCOMMODATED SHAFT DIAMETER4.500 INCHES NOMINAL IN
HOUSING BORE DIAMETER6.250 INCHES NOMINAL IN
MATERIALSTEEL CASE
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
SEAL WIDTH0.562 INCHES NOMINAL IN
OUTSIDE DIAMETER6.256 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR
CASE STYLESQUARE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
J514Interchangeable
interchangeable cross-reference
interchangeable
4-2 010102BAInterchangeable
interchangeable cross-reference
interchangeable
92596-11Interchangeable
interchangeable cross-reference
interchangeable
MS20074-04-11Interchangeable
interchangeable cross-reference
interchangeable
B6812Interchangeable
interchangeable cross-reference
interchangeable
BT-HT-107Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 199124R91?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 199124R91?
199124R91 is a SEAL,PLAIN ENCASED.
What parts can replace 199124R91?
There are 17 known substitutes for 199124R91: J514, 4-2 010102BA, 92596-11 and 14 more. Substitute compatibility should be verified for your specific system.
Is 199124R91 still available?
199124R91 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 199124R91

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026