PartsTable
Technical Data Sheet
PartsTable / MRO / 198-3
198-3 ✓ Verified by PartsTable
Leitz · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

For punched filing of separate documents. With a special fold and three dividers. Expandable pocket on back cover.

Sturdy, plastic-sintered suspension rods, clear tabs and exchangeable blank inserts. 250 g/m2 kraft board (recycled), extremely sturdy. For A4.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-120-4200, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 198-3
NSN: 3110-00-120-4200
FSC: 3110
CAGE: 12603 — CLARK EQUIPMENT CO (USA)
SPECIFICATIONS
colorBLACK OVERALL
materialNICKEL ALLOY K-500 OVERALL
inclosureINCLUDED
body_styleW/O MTG FACILITIES, AXIAL TERMINALS
body_width0.400 INCHES MAXIMUM IN
bore_shapeSTRAIGHT THROUGH BORE
head_styleKNURLED NO. 1
action_typeVIBRATING
body_height0.443 INCHES MAXIMUM IN
body_length0.938 INCHES NOMINAL IN
bonnet_typeOUTSIDE SCREW-YOKE
head_height0.250 INCHES NOMINAL IN
NSN3110-00-120-4200
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 198-3 · Leitz ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL OUTSIDE DIAMETER: 1.3120 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL OUTSIDE DIAMETER1.3120 INCHES NOMINAL IN
OVERALL LENGTH1.5000 INCHES NOMINAL IN
SPECIAL FEATURESROLLER TYPE: SOLID
VERIFIED SUBSTITUTES & CROSS-REFERENCES 33
536E17Interchangeable
interchangeable cross-reference
interchangeable
3842Interchangeable
interchangeable cross-reference
interchangeable
895916Interchangeable
interchangeable cross-reference
interchangeable
1616Interchangeable
interchangeable cross-reference
interchangeable
2605Interchangeable
interchangeable cross-reference
interchangeable
2905Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 198-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 198-3?
198-3 is a CAPACITOR,FIXED,PAPER DIELECTRIC manufactured by Leitz. It is classified as a MRO (MRO_GENERAL).
What parts can replace 198-3?
There are 33 known substitutes for 198-3: 536E17, 3842, 895916 and 30 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 198-3?
198-3 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-120-4200. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 198-3

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026