PartsTable
Technical Data Sheet
Download PDF

19788 — PISTON,VALVE

✓ Government record, cited
Jumbo · ORING SEAL
PRODUCT OVERVIEW

19788: PISTON,VALVE.

The PISTON,VALVE is a Jumbo industrial component. Key specifications include material: STEEL OVERALL, eye_width: 0.500 INCHES NOMINAL IN, eye_length: 2.000 INCHES NOMINAL IN, shank_length: 18.000 INCHES NOMINAL IN, thread_class: 2A A, thread_length: 18.000 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-598-8031, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
19788
NSN: 5340-00-598-8031
NIINs: 005988031, 008899805, 009369295
FSC: 5340 — Hardware, Commercial
CAGE: 00198 — PRATT & WHITNEY CANADA CORP DIV PRATT & WHITNEY CANADA CORP. (CAN)
SPECIFICATIONS
materialSTEEL OVERALL
eye_width0.500 INCHES NOMINAL IN
eye_length2.000 INCHES NOMINAL IN
shank_length18.000 INCHES NOMINAL IN
thread_class2A A
thread_length18.000 INCHES NOMINAL IN
overall_length21.000 INCHES NOMINAL IN
special_featuresFURNISHED WITH THREE SQ NUTS
style_designatorOVAL, CLOSED
thread_directionRIGHT-HAND
surface_treatmentZINC OVERALL
eye_stock_diameter0.562 INCHES NOMINAL IN
NSN5340-00-598-8031
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 19788 MFR: Jumbo ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FSC APPLICATION DATA: ACFT ENG R1830
•
MACHINED SURFACE FINISH: GROUND
•
DIAMETER: 0.749 INCHES NOMINAL IN
•
SURFACE TREATMENT: TIN
•
MATERIAL: STEEL
•
THICKNESS: 0.0625 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
FSC APPLICATION DATAACFT ENG R1830
MACHINED SURFACE FINISHGROUND
DIAMETER0.749 INCHES NOMINAL IN
SURFACE TREATMENTTIN
MATERIALSTEEL
THICKNESS0.0625 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
A19788Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 19788?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 19788?
19788 is a PISTON,VALVE manufactured by Jumbo.
What parts can replace 19788?
There is 1 known substitute for 19788: A19788. Substitute compatibility should be verified for your specific system.
What is the NSN for 19788?
19788 is cataloged in the U.S. Government catalog under NSN 5340-00-598-8031. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 19788