PartsTable
Technical Data Sheet
19766 ✓ Verified by PartsTable
Jumbo · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

With this quilling set you learn to make all kinds of water animals from paper strips.<br><br>Following the steps children learn to make all kind of ocean animals.<br>Make paper coils by turning the pen, size and stick them. No messy glue needed. <br>Pinch and twist the paper coils into any shape you like.

<br>Stick all the coils on the sticky back card and finalize the creation with some funny googly eyes.<br><br>This set can also be used in combination with the station.<br><br>- 1 Quilling pen<br>- 100 Sticky back strips (75 short + 25 long)<br>- 8 Creative cards (7 small + 1 large)<br>- Size board<br>- Sticky back googly eyes<br>- Instruction manual This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-543-4405, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
19766
NSN: 5306-00-543-4405
FSC: 5306
CAGE: 96046 — CRANE PUMPS & SYSTEMS PFT CORP DIV CRANE PUMPS & SYSTEM PFT CORP. (USA)
SPECIFICATIONS
special_featuresFOR PERFORMING NIST'S INTERIM FIELD TEST PROCEDURE IF-8016
end_item_identificationGROUND SUPPORT EQUIPMENT
NSN5306-00-543-4405
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 19766 · Jumbo ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
THREAD LENGTH: 0.858 INCHES MINIMUM AND 0.969 INCHES MAXIMUM IN
THREAD DIRECTION: RIGHT-HAND
WIDTH BETWEEN FLATS: 0.489 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER: 0.312 INCHES IN
FEATURES PROVIDED: FINISHED HEAD
THREAD QUANTITY PER INCH: 18
TECHNICAL CHARACTERISTICS (FLIS)
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
THREAD LENGTH0.858 INCHES MINIMUM AND 0.969 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
WIDTH BETWEEN FLATS0.489 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.312 INCHES IN
FEATURES PROVIDEDFINISHED HEAD
END ITEM IDENTIFICATIONMRAP - M-ATV W/CS 13 POP; A4 BRADLEY FIGHTING VEHICLE; A3 BRADLEY FIGHTING VEHICLE
THREAD QUANTITY PER INCH18
MINIMUM TENSILE STRENGTH80000 POUNDS PER SQUARE INCH LBS
FASTENER LENGTH0.969 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
F1-9Upgraded Successor
successor cross-reference
successor
28305Interchangeable
interchangeable cross-reference
interchangeable
70950100-019Interchangeable
interchangeable cross-reference
interchangeable
6096Interchangeable
interchangeable cross-reference
interchangeable
060962Interchangeable
interchangeable cross-reference
interchangeable
8123177Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 19766?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 19766?
19766 is a PARTS KIT,VALVE,CUR manufactured by Jumbo.
What parts can replace 19766?
There are 22 known substitutes for 19766: F1-9, 28305, 70950100-019 and 19 more. Substitute compatibility should be verified for your specific system.
Is 19766 still available?
19766 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 19766