PartsTable
Technical Data Sheet
Download PDF

197142-1 — PIN,STRAIGHT,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

197142-1: PIN,STRAIGHT,HEADLESS.

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: PLASTIC OVERALL, first_end_style: SQUARE, second_end_style: CHAMFERED, pin_overall_length: 0.970 INCHES NOMINAL IN, pin_overall_diameter: 0.1870 INCHES MINIMUM AND 0.1875 INCHES MAXIMUM IN, second_end_tip_radius: 0.030 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-342-7885, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
197142-1
NSN: 5315-01-342-7885
NIINs: 013427885, 017244101
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 24930 — L3HARRIS TECHNOLOGIES, INC DIV SPACE & AIRBORNE SYSTEMS (USA)
SPECIFICATIONS
materialPLASTIC OVERALL
first_end_styleSQUARE
second_end_styleCHAMFERED
pin_overall_length0.970 INCHES NOMINAL IN
pin_overall_diameter0.1870 INCHES MINIMUM AND 0.1875 INCHES MAXIMUM IN
second_end_tip_radius0.030 INCHES NOMINAL IN
second_end_taper_angle10.0 DEGREES NOMINAL
second_end_taper_length0.380 INCHES NOMINAL IN
second_end_relationship_with_first_endNOT IDENTICAL
NSN5315-01-342-7885
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 197142-1 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND END TAPER ANGLE: 10.0 DEGREES NOMINAL
•
FIRST END STYLE: SQUARE
•
SECOND END TAPER LENGTH: 0.380 INCHES NOMINAL IN
•
PIN OVERALL DIAMETER: 0.1870 INCHES MINIMUM AND 0.1875 INCHES MAXIMUM IN
•
PIN OVERALL LENGTH: 0.970 INCHES NOMINAL IN
•
SECOND END RELATIONSHIP WITH FIRST END: NOT IDENTICAL
•
SECOND END TIP RADIUS: 0.030 INCHES NOMINAL IN
•
SECOND END STYLE: CHAMFERED
TECHNICAL CHARACTERISTICS
SECOND END TAPER ANGLE10.0 DEGREES NOMINAL
FIRST END STYLESQUARE
SECOND END TAPER LENGTH0.380 INCHES NOMINAL IN
PIN OVERALL DIAMETER0.1870 INCHES MINIMUM AND 0.1875 INCHES MAXIMUM IN
PIN OVERALL LENGTH0.970 INCHES NOMINAL IN
SECOND END RELATIONSHIP WITH FIRST ENDNOT IDENTICAL
SECOND END TIP RADIUS0.030 INCHES NOMINAL IN
SECOND END STYLECHAMFERED
MATERIALPLASTIC OVERALL
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 197142-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 197142-1?
197142-1 is a PIN,STRAIGHT,HEADLESS.
What is the NSN for 197142-1?
197142-1 is cataloged in the U.S. Government catalog under NSN 5315-01-342-7885. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 197142-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.