PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 196C795P1
196C795P1 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1090 OR STEEL COMP 1095 OR STEEL COMP E50100 OR STEEL COMP E51100 OR STEEL COMP E52100 ROLLER, bore_diameter: 0.5000 INCHES NOMINAL IN, overall_width: 0.3025 INCHES MINIMUM AND 0.3125 INCHES MAXIMUM IN, alignment_type: RIGID, surface_finish: GROUND, style_designator: NON-SEPARABLE, OPEN END, DRAWN SHELL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-289-6606, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
196C795P1
NSN: 3110-00-289-6606
FSC: 3110
CAGE: 05606 — GENERAL DYNAMICS-OTS, INC. DIV ORDNANCE AND TACTICAL SYSTEMS (USA)
SPECIFICATIONS
materialSTEEL COMP 1090 OR STEEL COMP 1095 OR STEEL COMP E50100 OR STEEL COMP E51100 OR STEEL COMP E52100 ROLLER
bore_diameter0.5000 INCHES NOMINAL IN
overall_width0.3025 INCHES MINIMUM AND 0.3125 INCHES MAXIMUM IN
alignment_typeRIGID
surface_finishGROUND
style_designatorNON-SEPARABLE, OPEN END, DRAWN SHELL
lubrication_materialGREASE
overall_outside_diameter0.6875 INCHES NOMINAL IN
specification/standard_data05606-196C795 MANUFACTURERS SPECIFICATION CONTROL
standard_tolerance_designationAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
lubrication_material_document_and_classificationMIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
NSN3110-00-289-6606
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 196C795P1 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION MATERIAL: GREASE
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
•
ALIGNMENT TYPE: RIGID
•
SURFACE FINISH: GROUND
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
•
OVERALL OUTSIDE DIAMETER: 0.6875 INCHES NOMINAL IN
•
BORE DIAMETER: 0.5000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH0.3025 INCHES MINIMUM AND 0.3125 INCHES MAXIMUM IN
LUBRICATION MATERIALGREASE
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
ALIGNMENT TYPERIGID
SURFACE FINISHGROUND
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
OVERALL OUTSIDE DIAMETER0.6875 INCHES NOMINAL IN
BORE DIAMETER0.5000 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OUTER RACE
STYLE DESIGNATORNON-SEPARABLE, OPEN END, DRAWN SHELL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
36586-12Interchangeable
interchangeable cross-reference
interchangeable
B85MATCHEDSETOF3Interchangeable
interchangeable cross-reference
interchangeable
A-A-582160/3B85Interchangeable
interchangeable cross-reference
interchangeable
G789934-1Interchangeable
interchangeable cross-reference
interchangeable
M2535-Q70Interchangeable
interchangeable cross-reference
interchangeable
293698R91Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 196C795P1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 196C795P1?
196C795P1 is a BEARING,ROLLER,NEEDLE.
What parts can replace 196C795P1?
There are 6 known substitutes for 196C795P1: 36586-12, B85MATCHEDSETOF3, A-A-582160/3B85 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 196C795P1?
196C795P1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-289-6606. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 196C795P1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026