PartsTable
Technical Data Sheet
Download PDF

196B8829 — PIN,STRAIGHT,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

196B8829: PIN,STRAIGHT,HEADLESS.

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL COMP 316L OR STEEL COMP 316 OVERALL, first_end_style: CHAMFERED, surface_treatment: PASSIVATE OVERALL, pin_overall_length: 2.218 INCHES MINIMUM AND 2.228 INCHES MAXIMUM IN, first_hole_diameter: 0.102 INCHES MINIMUM AND 0.112 INCHES MAXIMUM IN, pin_overall_diameter: 0.3100 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-157-4911, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
196B8829
NSN: 5315-01-157-4911
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 05606 — GENERAL DYNAMICS-OTS, INC. DIV ORDNANCE AND TACTICAL SYSTEMS (USA)
SPECIFICATIONS
materialSTEEL COMP 316L OR STEEL COMP 316 OVERALL
first_end_styleCHAMFERED
surface_treatmentPASSIVATE OVERALL
pin_overall_length2.218 INCHES MINIMUM AND 2.228 INCHES MAXIMUM IN
first_hole_diameter0.102 INCHES MINIMUM AND 0.112 INCHES MAXIMUM IN
pin_overall_diameter0.3100 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN
second_hole_diameter0.102 INCHES MINIMUM AND 0.112 INCHES MAXIMUM IN
first_end_taper_angle13.0 DEGREES MINIMUM AND 17.0 DEGREES MAXIMUM
hole_arrangement_styleBOTH END DRILLED
material_document_and_classificationQQ-S-763 COND A FED SPEC ALL MATERIAL RESPONSES OVERALL
second_end_relationship_with_first_endIDENTICAL
center_to_center_distance_between_holes1.907 INCHES NOMINAL IN
NSN5315-01-157-4911
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 196B8829 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-STD-171 5.4.1 MIL STD SINGLE TREATMENT RESPONSE OVERALL
•
HOLE ARRANGEMENT STYLE: BOTH END DRILLED
•
FIRST END STYLE: CHAMFERED
•
FIRST HOLE DIAMETER: 0.102 INCHES MINIMUM AND 0.112 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 COND A FED SPEC ALL MATERIAL RESPONSES OVERALL
•
FIRST END TAPER ANGLE: 13.0 DEGREES MINIMUM AND 17.0 DEGREES MAXIMUM
•
PIN OVERALL DIAMETER: 0.3100 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN
•
PIN OVERALL LENGTH: 2.218 INCHES MINIMUM AND 2.228 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-STD-171 5.4.1 MIL STD SINGLE TREATMENT RESPONSE OVERALL
HOLE ARRANGEMENT STYLEBOTH END DRILLED
FIRST END STYLECHAMFERED
FIRST HOLE DIAMETER0.102 INCHES MINIMUM AND 0.112 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763 COND A FED SPEC ALL MATERIAL RESPONSES OVERALL
FIRST END TAPER ANGLE13.0 DEGREES MINIMUM AND 17.0 DEGREES MAXIMUM
PIN OVERALL DIAMETER0.3100 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN
PIN OVERALL LENGTH2.218 INCHES MINIMUM AND 2.228 INCHES MAXIMUM IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
SECOND HOLE DIAMETER0.102 INCHES MINIMUM AND 0.112 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 196B8829?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 196B8829?
196B8829 is a PIN,STRAIGHT,HEADLESS.
What is the NSN for 196B8829?
196B8829 is cataloged in the U.S. Government catalog under NSN 5315-01-157-4911. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 196B8829

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.